The biocomposites properties of compounded poly(lactic acid) with untreated and treated spent coffee grounds
Authors:
- 8 September 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (44)
Abstract
Poly (lactic acid) (PLA) is a biodegradable and environmentally friendly material. And the spent coffee grounds (SCG) are huge waste all over the world. Therefore, the issue that how to convert the low‐value wastes SCG into more valuable products is attracting more research attention. In this work, we compounded PLA with SCG. Firstly, the efficiency of oil extraction from SCG was compared by different methods and solvents. Then, the biocomposites specimens of different SCG contents (0, 5, 10, and 15 wt%) were prepared by extrusion and injection molding. The effects of SCG particle size and content on the thermal and mechanical properties were investigated. Next, the effect of coupling agent (4,4‐methylene diphenyl diisocyanate [MDI]) on the biocomposites properties at 10 wt% SCG was examined by Field emission‐scanning electron microscope and Fourier transform infrared spectroscopy. The results show that the tensile strength and elongation at break of the PLA composites with the optimal contents are increased by about 50% and 120%, respectively, compared with untreated SCG.Keywords
This publication has 41 references indexed in Scilit:
- Development and Application of Green Composites: Using Coffee Ground and Bamboo FlourJournal of Polymers and the Environment, 2013
- Biocomposites reinforced with natural fibers: 2000–2010Progress in Polymer Science, 2012
- Spent Coffee Grounds as a Versatile Source of Green EnergyJournal of Agricultural and Food Chemistry, 2008
- Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer compositesComposites Part B: Engineering, 2008
- Processing technologies for poly(lactic acid)Progress in Polymer Science, 2008
- Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor?Polymer, 2006
- In-Depth Investigation of Biomass Pyrolysis Based on Three Major Components: Hemicellulose, Cellulose and LigninEnergy & Fuels, 2005
- Thermal and dynamic mechanical characterization of polypropylene‐woodflour compositesPolymer Engineering & Science, 2002
- Thermal stability of blends of polyolefins and sisal fiberPolymer Degradation and Stability, 1999
- Dynamic mechanical analysis of injection-moulded discs of polypropylene and untreated and silane-treated talc-filled polypropylene compositesPolymer, 1999