Microstructure and Nanoindentation Behavior of FeCoNiAlTi High-Entropy Alloy-Reinforced 316L Stainless Steel Composite Fabricated by Selective Laser Melting
Open Access
Abstract
Selective laser melting (SLM) is one of the metal additive manufactured technologies with the highest forming precision, which prepares metal components through melting powders layer by layer with a high-energy laser beam. The 316L stainless steel is widely used due to its excellent formability and corrosion resistance. However, its low hardness limits its further application. Therefore, researchers are committed to improving the hardness of stainless steel by adding reinforcement to stainless steel matrix to fabricate composites. Traditional reinforcement comprises rigid ceramic particles, such as carbides and oxides, while the research on high entropy alloys as reinforcement is limited. In this study, characterisation by appropriate methods, inductively coupled plasma, microscopy and nanointendation assay, showed that we successfully prepared the FeCoNiAlTi high entropy alloy (HEA)-reinforced 316L stainless steel composites using SLM. When the reinforcement ratio is 2 wt.%, the composite samples show higher density. The SLM-fabricated 316L stainless steel displays columnar grains and it varies to equiaxed grains in composites reinforced with 2 wt.% FeCoNiAlTi HEA. The grain size decreases drastically, and the percentage of the low angle grain boundary in the composite is much higher than in the 316L stainless steel matrix. The nanohardness of the composite reinforced with 2 wt.% FeCoNiAlTi HEA is twice as high as the 316L stainless steel matrix. This work demonstrates the feasibility of using a high-entropy alloy as potential reinforcement in stainless steel systems.Keywords
Funding Information
- National Natural Science Foundation of China (52271149)
This publication has 72 references indexed in Scilit:
- Production of high strength Al85Nd8Ni5Co2 alloy by selective laser meltingAdditive Manufacturing, 2015
- Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) TechnologyMetallography, Microstructure, and Analysis, 2014
- High-Entropy Alloys: A Critical ReviewMaterials Research Letters, 2014
- Microstructure and tensile properties of iron parts fabricated by selective laser meltingOptics & Laser Technology, 2014
- Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particlesJournal of Alloys and Compounds, 2014
- Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatmentMaterials Science and Engineering: A, 2014
- Research on track overlapping during Selective Laser Melting of powdersJournal of Materials Processing Technology, 2012
- The effect of production method on properties of Fe–TiC compositeInternational Journal of Mineral Processing, 2010
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- The Marangoni EffectsNature, 1960