Exhaust System Heat Transfer and Catalytic Converter Performance
Authors:
- 1 March 1999
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Three-way catalytic converters used on spark ignition engines have performance and durability characteristics which are effected by the thermal environment in which these operate. The design of the exhaust system and the location of the catalyst unit are important in controlling the range of thermal states the catalyst is exposed to. A model of system thermal behaviour has been developed to support studies of these. The exhaust system is modelled as connected pipe and junction elements with lumped thermal capacities. Heat transfer correlations for quasi-steady and transient conditions have been investigated. The catalytic converter is treated as elemental slices in series. Exothermic heat release and heat exchange between the monolith, mat, and shell are described in the model. A similar description is applied to lean NOx trap units. Agreement between predictions and experimental data is good for streamwise temperature distributions throughout the system, and temporal variations under drive cycle conditions. The model is computationally efficient, and requires around 2 minutes of run-time on a Pentium PC computer to simulate system behaviour over an NEDC or FTP-75 drive cycle.Keywords
This publication has 17 references indexed in Scilit:
- Prediction of Exhaust Gas Temperature at the Inlet of an Underbody Catalytic Converter During FTP-75 TestSAE International Journal of Advances and Current Practices in Mobility, 1997
- Progress on Modelling Engine Thermal Behaviour for VTMS ApplicationsSAE International Journal of Advances and Current Practices in Mobility, 1997
- Computer aided assessment and optimization of catalyst fast light-off techniquesProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 1997
- A Multi-Dimensional Numerical Method for Predicting Warm-Up Characteristic of Automobile Catalytic Converter SystemsSAE International Journal of Advances and Current Practices in Mobility, 1995
- A Study of Warm-Up Processes in SI Engine Exhaust SystemsSAE International Journal of Advances and Current Practices in Mobility, 1993
- An Integrated Computational Model for the Optimisation of Monolith Catalytic ConvertersSAE International Journal of Advances and Current Practices in Mobility, 1993
- Transients of monolithic catalytic converters. Response to step changes in feedstream temperature as related to controlling automobile emissionsIndustrial & Engineering Chemistry Product Research and Development, 1982
- Heat Transfer in the Straight Section of an Exhaust Port of a Spark Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 1979
- Heat and mass transfer in honeycomb catalysts—IIChemical Engineering Science, 1975
- Heat Transfer and Pressure Drop of Liquids in TubesIndustrial & Engineering Chemistry, 1936