Novel Composite Anodes Consisting of Lithium Transition-Metal Nitrides and Transition Metal Oxides for Rechargeable Li-Ion Batteries
Authors:
- 1 January 2006
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 153 (2) , A437-A444
Abstract
Lithium transition-metal nitrides are promising anode candidates for Li-ion batteries. However, lithium must be extracted from the nitrides in an initial anodic oxidation, indicating these compounds cannot directly combine with the current cathodes to constitute cells. This deterrent can be overcome by introducing a certain amount of Co3O4Co3O4 , which shows large capacities and relatively high oxidation/reduction potentials, into the electrodes containing the above nitrides. A thermodynamically spontaneous reaction between these two active hosts results in a delithiated state of lithium metal nitrides. Under cycling within 1.4–0V1.4–0V vs Li∕Li+Li∕Li+ , Co3O4Co3O4 is relatively inert to lithium and the nitrides become electrochemically active. The composite electrodes show high first-cycle efficiency of 100%, large capacities of 500mAhg−1500mAhg−1 , and excellent cyclability. Furthermore, research revealed that the composite electrodes demonstrated high cycling stability operating with polyethylene oxide (PEO) electrolytes at the elevated temperature. The reaction heating of the composite electrode under high Li utilization with PEO electrolytes via differential scanning calorimetry measurement was found to be extremely low compared with those of the lithium metal and the Li-alloy-based systems, suggesting that the composite electrodes could be promising anode candidates for all-solid-state PEO Li-ion batteries in terms of capacity, first-cycle charge efficiency, and thermal reliance.Keywords
This publication has 20 references indexed in Scilit:
- The Effect of Doped Elementals on the Electrochemical Behavior of Hexagonal Li[sub 2.6]Co[sub 0.4]NJournal of the Electrochemical Society, 2004
- The improvement of the cycle life of Li2.6Co0.4N as an anode of Li-ion secondary batterySolid State Ionics, 2003
- Local Structural Variations of Li[sub 2.6]Co[sub 0.4]N during the First Charge and DischargeElectrochemical and Solid-State Letters, 2002
- Issues and challenges facing rechargeable lithium batteriesNature, 2001
- Lithium secondary batteries using a lithium cobalt nitride, Li2.6Co0.4N, as the anodeSolid State Ionics, 2000
- Reaction mechanisms of Li2.6Co0.4N anode materialSolid State Ionics, 1999
- Electron energy loss spectroscopy of Li2.6 − xCo0.4N (x = 0.0 and 1.6)Journal of Physics and Chemistry of Solids, 1998
- Electrochemical studies of a new anode material, Li3 − xMxN (M = Co, Ni, Cu)Journal of Power Sources, 1997
- Anode performance of a new layered nitride Li3 − xCoxN (x = 0.2–0.6)Journal of Power Sources, 1997
- Synthesis and electrochemical studies of a new anode material, Li3 − xCoxNSolid State Ionics, 1996