Abstract
In this paper, the possibility of adsorption treatment of oil refineries industrial wastewater from phenols by production waste was considered. Phenols are toxic substances for the human body and belong to the II hazard class. Legally approved sanitary and hygienic standards establish maximum permissible concentrations (M PC) of phenols: M PC in the air of the working area of industrial promises is 1 mg/m(3), M PC in water is 0.001 mg/dm(3). It is proposed to use carbonate sludge for chemical water treatment of natural water for wastewater treatment, as one of the most accessible materials, which is a large-tonnage waste of energy. In the work, carbonate sludge of Aktobe TPP JSC formed during liming and coagulation at the stage of preliminary purification of incoming water. The adsorption isotherm, the kinetic, curve of phenol adsorption, the output curve of phenol adsorption under dynamic conditions have been constructed, and the dynamic sorption material "GrSM-1" is determined. On the basis of carbonate sludge, a granular hydrophobic sorption material of waste from the power industry "GrSM -1", modified with a water repellent and liquid sodium glass, has been developed. After heat treatment, granules with a particle diameter of 0.5 2.5 mm are formed by rolling. A technological scheme for the purification of industrial wastewater from phenols is proposed, the calculation of the fictitious and true flow rate, adsorbent density, adsorbent specific surface area, Reynolds number, friction coefficient, adsorbent mass in an adsorption filter with carbonate sludge loading in the scheme of wastewater treatment from phenols of Aklobe Oil Refining LLP was performed.