Mechanism of fracture related heating for 500-kV composite insulators in highly humid areas
Authors:
- 1 June 2015
- journal article
- research article
- Published by Hindawi Limited in International Transactions on Electrical Energy Systems
- Vol. 26 (3) , 641-654
Abstract
With the adoption of composite insulators in the field of high voltage transmission, it is essential to focus on its safety performance. Our study paid attention to the extensive heating within HV ending of 500‐kV AC composite insulators in southern China with high level of humidity and proposed corresponding countermeasures. Via superficial examination, IR and UV test, interface quality inspection, chemical analysis and water absorption test and etc., we were able to study the defected insulators. According to our observation, insulators were slightly covered with pollutants and maintained superficial hydrophobic properties. The heating performance of HV ending of insulators was closely related to humidity as well as the type and site of loading voltage. We suggested that when exposed to high humidity, polarization of the molecules from water, polar groups of material and the interlayer resulted in the abnormal heating; on the other hand, when the environment humidity was low the heating was attributed to partial discharge. Consequently, we provided several solutions toward the issue according to our observations. Copyright © 2015 John Wiley & Sons, Ltd.Keywords
Funding Information
- National Basic Research Program of China (2011CB209406)
- National Natural Science Foundation of China (51477072)
This publication has 14 references indexed in Scilit:
- Analysis of a fractured 500 kV composite insulator - identification of aging mechanisms and their causesIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Insulator Contamination Forecasting Based on Fractal Analysis of Leakage CurrentEnergies, 2012
- Characterization of polymeric insulators using thermal and UV imaging under laboratory conditionsIEEE Transactions on Dielectrics and Electrical Insulation, 2009
- Properties of interfaces between silicone rubber and epoxyIEEE Transactions on Dielectrics and Electrical Insulation, 2008
- Impact of weathering on flashover performance of nonceramic insulatorsIEEE Transactions on Dielectrics and Electrical Insulation, 2008
- Diagnostic Methods for Outdoor Polymeric InsulatorsIEEE Transactions on Dielectrics and Electrical Insulation, 2007
- Degradation of solid dielectrics due to internal partial discharge: some thoughts on progress made and where to go nowIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- FTIR analysis of non-ceramic composite insulatorsIEEE Transactions on Dielectrics and Electrical Insulation, 2004
- Outdoor HV composite polymeric insulatorsIEEE Transactions on Dielectrics and Electrical Insulation, 1999
- Non-Ceramic insulators-a simple design that requires careful analysisIEEE Electrical Insulation Magazine, 1996