Bioresorbable ureteral stents from natural origin polymers
- 26 June 2014
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 103 (3) , 608-617
Abstract
In this work, stents were produced from natural origin polysaccharides. Alginate, gellan gum, and a blend of these with gelatin were used to produce hollow tube (stents) following a combination of templated gelation and critical point carbon dioxide drying. Morphological analysis of the surface of the stents was carried out by scanning electron microscopy. Indwelling time, encrustation, and stability of the stents in artificial urine solution was carried out up to 60 days of immersion.In vitrostudies carried out with simulated urine demonstrated that the tubes present a high fluid uptake ability, about 1000%. Despite this, the materials are able to maintain their shape and do not present an extensive swelling behavior. The bioresorption profile was observed to be highly dependent on the composition of the stent and it can be tuned. Complete dissolution of the materials may occur between 14 and 60 days. Additionally, no encrustation was observed within the tested timeframe. The ability to resist bacterial adherence was evaluated with Gram‐positiveStaphylococcus aureusand two Gram‐negativesEscherichia coliDH5 alpha andKlebsiella oxytoca. ForK. oxytoca, no differences were observed in comparison with a commercial stent (Biosoft®duo, Porges), although, forS. aureusall tested compositions had a higher inhibition of bacterial adhesion compared to the commercial stents. In case ofE. coli, the addition of gelatin to the formulations reduced the bacterial adhesion in a highly significant manner compared to the commercial stents. The stents produced by the developed technology fulfill the requirements for ureteral stents and will contribute in the development of biocompatible and bioresorbable urinary stents. © 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 103B: 608–617, 2015.Keywords
Funding Information
- The European Union Seventh Framework Programme (REGPOT-CT2012-316331-POLARIS)
- Novel smart and biomimetic materials for innovative regenerative medicine approaches" (RL1 - ABMR - NORTE-01-0124-FEDER-000016; North Portugal Regional Operational Programme (ON.2 - O Novo Norte), National Strategic Reference Framework (NSRF), European Regional Development Fund (ERDF))
- FCT post-doc (SFRH/BPD/39333/2007, SFRH/BPD/90533/2012)
This publication has 41 references indexed in Scilit:
- Forgotten Ureteral Stents: Who's at Risk?Journal of Endourology, 2013
- The role of organic solvent on the preparation of chitosan scaffolds by supercritical assisted phase inversionThe Journal of Supercritical Fluids, 2012
- Comparison of a biodegradable ureteral stent versus the traditional double-J stent for the treatment of ureteral injury: an experimental studyBiomedical Materials, 2012
- New Metallic Ureteral Stents: Improved Tensile Strength and Resistance to Extrinsic CompressionJournal of Endourology, 2012
- A polycationic antimicrobial and biocompatible hydrogel with microbe membrane suctioning abilityNature Materials, 2010
- Ureteral stents: new ideas, new designsTherapeutic Advances in Urology, 2010
- Polymers as Ureteral StentsJournal of Endourology, 2010
- Gellan gum: A new biomaterial for cartilage tissue engineering applicationsJournal of Biomedical Materials Research Part A, 2009
- Preparation and characterization of alginate/gelatin blend fibersJournal of Applied Polymer Science, 2005
- Ureteric Stenting-Current StatusSeminars in Interventional Radiology, 2000