Deformation of Alumina/Titanium Carbide Composite at Elevated Temperatures
Authors:
- 1 September 1991
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 74 (9) , 2258-2262
Abstract
The deformation behavior of an Al 2 O 3 /30 wt% TIC composite in uniaxial tension was evaluated under vacuum over the temperature range of 1300° to 1550°C. The Al 2 0 3 /TiC composite exhibited the maximum elongation of 66% at an initial strain rate of 1.19 X l0 ‐4 s ‐1 at 1550°C. The stress exponent calculated from peak stresses of true stress‐true strain curves at 1500 O C was 3.8, which was in good agreement with that obtained by changing the crosshead speed during the tension test. The apparent activation energy at 20 MPa was 853 kJ/mol. In addition the deformation of the Al 2 O 3 /TiC composite in uniaxial tension at elevated temperature was accompanied by cavitation.Keywords
This publication has 13 references indexed in Scilit:
- High‐Pressure Self‐Combustion Sintering of Alumina‐Titanium Carbide Ceramic CompositeJournal of the American Ceramic Society, 1990
- Pressureless Sintering of Alumina‐Titanium Carbide CompositesJournal of the American Ceramic Society, 1989
- Pressureless-sintered Al2O3-TiC compositesMaterials Science and Engineering: A, 1988
- Effect of Dispersion of ZrO2 Particles on Creep of Fine-Grained Al2O3Journal of the Ceramic Society of Japan, 1988
- Effect of Heating Rate on Densification of Alumina-Titanium Carbide CompositesAdvanced Ceramic Materials, 1986
- Plastic Deformation of Fine‐Grained Alumina (Al 2 O 3 ): I, Interface‐Controlled Diffusional CreepJournal of the American Ceramic Society, 1980
- Plastic Deformation of Fine‐Grained Alumina (Al 2 O 3 ): II, Basal Slip and Nonaccommodated Grain‐Boundary SlidingJournal of the American Ceramic Society, 1980
- Studies on the Acid Resistance of E GlassJournal of the American Ceramic Society, 1980
- Creep Deformation in MgO‐Saturated Large‐Grain‐Size Al 2 O 3Journal of the American Ceramic Society, 1971
- On grain boundary sliding and diffusional creepMetallurgical Transactions, 1971