New Strategies for Soot Emission Reduction of HD Vehicles
- 25 October 2004
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The reduction of particulate emissions limits requires new strategies for the tuning of engines and exhaust after treatment systems. A non-blocking exhaust after treatment solution for HD vehicles to achieve the EuroIV emission limits has been developed which consists of a platinum oxidation catalyst and a stainless steel deposition structure with open channels for continuous soot storage and oxidation [1]. The significant advantages compared to standard particulate filters are caused by the open channel structure and characterized by a relatively low level of back pressure, selective separation of soot (EC) and penetrability for engine lubrication oil incineration ash. Extensive laboratory studies, including a screening of numerous promising deposition structure designs, led to a metal catalyst structure with microsphere coating. The processes dominating particle deposition could be determined, leading to a target-oriented optimization of the deposition structure. Particle deposition caused by diffusion, interception and thermophoresis during instationary test conditions occurs. Measurements on the test bench with an EuroII HD engine show a gravimetric particulate matter reduction of 18 and 55 mg/kWh for the ESC/ETC, which is consistent with the laboratory-studies. A new photo acoustic instrument (PASS) was applied allowing reliable determination of soot deposition efficiency even during the transient test cycle (ETC) for modern HD engines with a low PM raw emission. Close correlation between number based (SMPS) and mass based (PASS, gravimetric) particle concentration measurements were observed. The exhaust aftertreatment system investigated here system provides a reliable solution yielding a conversion of up to 70% (ESC/ETC) for elemental carbon at a moderate back pressure.Keywords
This publication has 8 references indexed in Scilit:
- Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten KatalysatorstrukturenChemie Ingenieur Technik, 2004
- Advances in the development of filterless soot deposition systems for the continuous removal of diesel particulate matterTopics in Catalysis, 2004
- A Photoacoustic Sensor System for Time Resolved Quantification of Diesel Soot EmissionsSAE International Journal of Advances and Current Practices in Mobility, 2004
- The generation and characterisation of elemental carbon aerosols for human challenge studiesJournal of Aerosol Science, 2003
- Development and characterization of a mobile photoacoustic sensor for on-line soot emission monitoring in diesel exhaust gasAnalytical and Bioanalytical Chemistry, 2003
- DETERMINATION OF THE SULFATE CONTENT OF DIESEL EXHAUST PARTICULATE MATTERJournal of Aerosol Science, 2001
- Diesel Exhaust Particle Size: Measurement Issues and TrendsSAE International Journal of Advances and Current Practices in Mobility, 1998
- Deposition, diffusion and adsorption in the diesel oxidation catalystApplied Catalysis B: Environment and Energy, 1996