Interfacial reactions and joint strength of Sn–37Pb and Sn–3.5Ag solders with immersion Ag-plated Cu substrate during aging at 150 °C
- 1 December 2006
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 21 (12) , 3196-3204
Abstract
Joint reliability of immersion Ag with two different solders, Sn–37Pb and Sn–3.5Ag, were evaluated. We first compared the interfacial reactions of the two solder joints and also successfully revealed a connection between the interfacial reaction behavior and mechanical reliability. The Sn–Pb solder produced a Pb-rich phase along the interface between the solder and the Cu substrate during aging. In contrast, the Sn–Ag solder exhibits an off-eutectic reaction to produce the eutectic phase and Ag3Sn precipitate. The shear test results show that the Sn–Pb solder joint fractured along the interface showing brittle failure indications possibly due to the brittle Pb-rich layer. In contrast, the failure of Sn–Ag solder joint was only through the bulk solder, providing evidence that the interface is mechanically reliable. The results from this study confirm that the immersion Ag/Sn–Ag solder joint is mechanically robust, and thus the combination is a viable option for a Pb-free package system.Keywords
This publication has 22 references indexed in Scilit:
- Isothermal aging effects on the microstructure and solder bump shear strength of eutectic Sn37Pb and Sn3.5Ag soldersMicroelectronics Reliability, 2006
- Interfacial reactions of Sn–Cu solder with Ni/Au surface finish on Cu pad during reflow and aging in ball grid array packagesMaterials Science and Engineering: B, 2005
- Reliability investigation and interfacial reaction of ball-grid-array packages using the lead-free Sn-Cu solderJournal of Electronic Materials, 2004
- Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallizationActa Materialia, 2004
- IMC Growth and Shear Strength of Sn-Ag-Bi-In/Au/Ni/Cu BGA Joints During AgingMATERIALS TRANSACTIONS, 2004
- Growth of an intermetallic compound layer with Sn-3.5Ag-5Bi on Cu and Ni-P/Cu during aging treatmentJournal of Electronic Materials, 2003
- Interfacial Microstructure Evolution Between Eutectic SnAgCu Solder and Al/Ni(V)/Cu Thin FilmsJournal of Materials Research, 2002
- Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn–3.5Ag, Sn–3.8Ag–0.7Cu and Sn–0.7Cu) on CuJournal of Materials Research, 2002
- Effect of Surface Finishes on Ball Shear Strength in BGA Joints with Sn-3.5 mass%Ag SolderMATERIALS TRANSACTIONS, 2002
- Lead-free Solders in MicroelectronicsMaterials Science and Engineering: R: Reports, 2000