Study on the Failure Mechanism for Coal Roadway Stability in Jointed Rock Mass Due to the Excavation Unloading Effect
Open Access
Abstract
Aiming at the large deformation instability problem caused by the excavation unloading of a coal roadway in deep-buried slowly inclined jointed rock mass, the geomechanical parameters and deformation failure characteristics of an engineering geomechanical model were investigated. The in-situ stress state of the model was measured with the stress relief method. The geological and mechanical properties of roadway surrounding rock were described. The surrounding rock structure was revealed with the electron microscopy scanning method, micro-fractures and randomly distributed joints highly developed in roadway surrounding rock. Field investigation and monitoring indicated the cross-section of roadway surrounding rock shrank continuously and the deformation distribution was obviously asymmetric. Shotcrete spalling and cable broken failures frequently occurred in the middle and ride side of roof and right rib. Based on the geomechanical conditions of the coal roadway, a discrete element numerical model of coal roadway in gently inclined jointed rock mass was established. The parameters of rock mass in the numerical model were calibrated. The model ran in unsupported condition to restore the evolution process of stress, crack propagation and deformation in roadway surrounding rock due to gradual deviatoric stress release caused by excavation. On this basis, the space-time evolution characteristics and law of stress, crack propagation and deformation were obtained and then the asymmetric large fragmentation and dilatation deformation failure mechanism of roadway surrounding rock in deep-buried slowly inclined jointed rock mass was revealed. The failure reasons of the support structure were analyzed, and the relevant support principles were proposed. The research results can provide scientific references for the stability control of roadways excavated in jointed rock mass.Keywords
Funding Information
- National Natural Science Foundation of China (41672347)
This publication has 24 references indexed in Scilit:
- Investigation on support pattern of a coal mine roadway within soft rocks — a case studyInternational Journal of Coal Geology, 2015
- Support technologies for deep and complex roadways in underground coal mines: a reviewInternational Journal of Coal Science & Technology, 2014
- Discrete element modelling of deformation and damage of a roadway driven along an unstable goaf — A case studyInternational Journal of Coal Geology, 2014
- The application of a modified Voronoi logic to brittle fracture modelling at the laboratory and field scaleInternational Journal of Rock Mechanics and Mining Sciences, 2014
- Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approachComputers and Geotechnics, 2014
- Multi-approach back-analysis of a roof bed collapse in a mining room excavated in stratified rockInternational Journal of Rock Mechanics and Mining Sciences, 2008
- A clumped particle model for rockInternational Journal of Rock Mechanics and Mining Sciences, 2007
- Bolt length requirement in underground openingsInternational Journal of Rock Mechanics and Mining Sciences, 2007
- Damage initiation and propagation in hard rock during tunnelling and the influence of near-face stress rotationInternational Journal of Rock Mechanics and Mining Sciences, 2004
- The effect of joint constitutive laws on the modelling of an underground excavation and comparison with in situ measurementsInternational Journal of Rock Mechanics and Mining Sciences, 1997