Effect of Seawater Ageing on Fracture Toughness of Stitched Glass Fiber/Epoxy Laminates for Marine Applications
Open Access
- 12 February 2021
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (2) , 196
Abstract
Composite materials are used in various industries such as marine, aircraft, automotive, etc. In marine applications, composites are exposed to seawater, which can affect their mechanical properties due to moisture absorption. This work focuses on the durability of composite materials under the short-term effect of seawater ageing. The specimens were prepared from glass fiber/epoxy using a hand lap-up method and stitched in the z-direction with Kevlar fiber. The specimens were submerged in seawater for 24 and 35 days. A significant decrease in maximum load was found as specimen immersion time in seawater increased. The seawater ageing also affected fracture toughness with a reduction of 30% for 24 days immersion and 55% for 35 days. The ageing also caused the swelling of composites due to moisture absorption, which increased the weight of the specimens. Compared to the dry specimens, the weight of the specimen for 24 days increases to 5.2% and 7.89% for 35 days’ seawater ageing. The analysis also showed that due to seawater ageing, the de-bonding rate increased as the number of days increased.Keywords
This publication has 30 references indexed in Scilit:
- Fracture Toughness Investigation on Long Kenaf/Woven Glass Hybrid Composite Due To Water Absorption EffectProcedia Engineering, 2012
- Effect of stitch density and stitch thread thickness on low-velocity impact damage of stitched compositesComposites Part A: Applied Science and Manufacturing, 2010
- Effect of Seawater and Warm Environment on Glass/Epoxy and Glass/Polyurethane CompositesApplied Composite Materials, 2010
- Rubber-Toughened Epoxies: A Critical ReviewPolymer Reviews, 2009
- Effect of sea environment on interfacial delamination behavior of polymeric sandwich structuresComposites Science and Technology, 2009
- The effects of water aging on the interphase region and interlaminar fracture toughness in polymer–glass compositesComposites Science and Technology, 2004
- Mixed mode delamination of polymer composite laminates reinforced through the thickness by z-fibersComposites Part A: Applied Science and Manufacturing, 2002
- Effect of Aqueous Environment and Temperature on Glass-Fibre Epoxy Resin CompositesJournal of Reinforced Plastics and Composites, 2000
- Seawater immersion ageing of glass-fibre reinforced polymer laminates for marine applicationsComposites Part A: Applied Science and Manufacturing, 1999
- Improving the delamination resistance of CFRP by stitching—a reviewComposites Science and Technology, 1994