FDTD analysis of dielectric resonators with curved surfaces

Authors:
  • NKN. Kaneda
    N. Kaneda
  • BHB. Houshmand
    B. Houshmand
  • TIT. Itoh
    T. Itoh

Abstract
In this paper, the finite-difference time-domain (FDTD) method is applied to calculate the resonant frequency of dielectric res- onators (DR's) with curved surface. The contour-path integral FDTD (CFDTD) is modified to deal with the curved surface of the dielectric body while the traditional rectangular cells are maintained. Results are com- pared with theoretical values and staircase approximation, and show that the present method is more accurate than the staircase approximation. Dielectric resonators (DR's) and DR antennas have been analyzed by the finite-difference time-domian (FDTD) method by a number of authors (1)-(4). It is found that the FDTD is well suited for these types of problems. For the axially symmetric structures, the resonant frequency and the intrinsic quality factor of the cylindrical DR has been successfully obtained by reducing three-dimensional (3-D) Maxwell's equations to two-dimensional (2-D) ones, and using rectangular grids in the 2-D computation domain. Those methods have simplicity and comparable accuracy to frequency- domain methods. However, in practice, the practical structures are often axially asymmetric, such as rod DR's with a rectangular coupling aperture for the dual-mode filters (5) and microstrip line-fed DR antennas (6), (7). Therefore, the study of these structures by 3-D analysis is essential. In addition, a direct treatment of curved surfaces is required, since many practical structures contain such boundaries. The contour-path integral FDTD (CFDTD) method has been suc- cessfully applied to curved surfaces of conducting and dielectric bodies (8), (9). However, this method needs special treatment for those -fields across the boundary such as the borrowing of neigh- boring fields (8) and the interpolation of fields (9). These procedures cause additional complexity and computation time. Finite-volume time-domain (FVTD) techniques (10), (11) and the nonorthogonal FDTD method (12) have improved accuracy for the approximation of curved surfaces at the expense of complex operation and increased computation time and memory. The method employed in this paper can also be classified as one form of the FVTD technique which is specifically applied on the traditional Yee's cell. In this paper, the idea of the effective dielectric constant is proposed to modify the CFDTD method, and to simplify the FVTD technique, to deal with curved dielectric surfaces. By doing so, no increase in computation time and memory is required as compared to the traditional FDTD method with staircase approximation. Finally, the method is applied for calculation of various DR structures. The results verify improved accuracy of the proposed method.

This publication has 14 references indexed in Scilit: