Modeling the Effect of Chloride Content on Hydrogen Sulfide Corrosion of Pure Iron by Coupling of Phase and Polarization Behavior
Author:
- 1 June 2008
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 64 (6) , 483-495
Abstract
Localized corrosion of higher alloyed steels has frequently been shown to produce locally aggressive solutions with low pH levels in crevices and pits. It also has been established that such solutions can serve to initiate and propagate stress corrosion cracking. The present model aims at a basic understanding of the time-dependent local acidification process and, in a first approach, uses pure iron as a model metal. The model couples the anodic polarization resistances to the precipitated equilibrium masses of iron disulfide (FeS2), which in a “closed loop” time stepwise procedure are calculated from the solute concentrations in a diffusion boundary layer. With the cathodic process controlled by hydrogen ion reduction, the precipitation of FeS2 enforces local pH reductions at the anodic site depending on the total concentrations of HS–, Fe++, and H+ in the assumed diffusion layer. In the present work, the effects of chlorides on ion migration, sulfide solubility, anodic polarization resistances, and solid phase precipitations of FeS2, together with ferrous chloride (FeCl2), are integrated into the model. As a result, the increase of chloride contents accelerates the anodic acidification and increases the mean corrosion currents. This effect is more pronounced at higher H2S partial pressures depending on bulk pH levels. As in the previous work, the reduction of bulk pH accelerates acidification and increases the corrosion currents. As a specific result for pH levels below 7, the effect of H2S partial pressures is characterized by an initial drop of corrosion currents followed by an increase at higher H2S contents. Also, the increase of total pressures at a constant H2S volume content enhances corrosion rates due to the respective effect of increasing H2S partial pressures. The results are shown to reflect presently known experimental and sour service field corrosion experiences.Keywords
This publication has 16 references indexed in Scilit:
- Modeling Crevice Corrosion of Pure Chromium by Coupling of Phase and Polarization BehaviorCorrosion, 2004
- The Effect of Sour Gases and Some Anions on the Corrosion Behavior of Carbon SteelPortugaliae Electrochimica Acta, 2004
- Environment-Assisted Cracking of Corrosion-Resistant Alloys in Oil and Gas Production Environments: A ReviewCorrosion, 2001
- Simulation of CO2/H2S Corrosion Using Thermodynamic and Electrochemical Models1999
- Effect of Hydrogen Sulfide Partial Pressure, PH, and Chloride Content on the SSC Resistance of Martensitic Stainless Steels and Martensitic Precipitation Hardening Stainless Steels1999
- Wet H2S Performance of as Delivered and Quenched Modified Martensitic Stainless Steels Determined by SSRT1999
- In Situ Study of Salt Film Stability in Simulated Pits of Nickel by Raman and Electrochemical Impedance SpectroscopiesJournal of the Electrochemical Society, 1997
- Corrosion of Iron in an H2S-CO2-H2O System: Corrosion Film Properties on Pure IronCorrosion, 1963
- Corrosion of Iron in an H2S-CO2-H2O SystemCorrosion, 1962
- Individual Activity Coefficients of Ions in Aqueous SolutionsJournal of the American Chemical Society, 1937