A novel electrolyte with the ability to form a solid electrolyte interface on the anode and cathode of a LiMn2O4/graphite battery
Authors:
- 23 August 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 1 (41) , 12954-12961
Abstract
To improve the cyclability of a LiMn2O4/graphite lithium ion battery at elevated temperature, a carbonate-based electrolyte using prop-1-ene-1,3-sultone (PES) as additive was developed. The cycling performance of the LiMn2O4/graphite cell, based on the developed electrolyte at 60 °C, was evaluated by a constant current charge/discharge test, with comparison of the electrolyte using vinylene carbonate (VC) as additive. It was found that the cell based on the developed electrolyte exhibits better cyclability and exhibits better dimensional stability at elevated temperatures. The capacity retention is 91% and the swell value in thickness is 3.4% for the cell with PES after 150 cycles at 60 °C, while the respective values were 68% and 36.4% for the cell without additive, and 82% and 9.1% for the cell with VC. The results obtained from scanning electron spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, thermal gravimetric analysis, and molecular energy level calculations show that PES favors the formation of a stable solid electrolyte interphase, not only on the anode but also on the cathode of the LiMn2O4/graphite battery, effectively preventing electrolyte decomposition.Keywords
This publication has 59 references indexed in Scilit:
- Prop-1-ene-1,3-sultone as SEI formation additive in propylene carbonate-based electrolyte for lithium ion batteriesElectrochemistry Communications, 2012
- A review of the features and analyses of the solid electrolyte interphase in Li-ion batteriesElectrochimica Acta, 2010
- Effect of fluoroethylene carbonate on high temperature capacity retention of LiMn2O4/graphite Li-ion cellsElectrochimica Acta, 2010
- Vinyl-Tris-(methoxydiethoxy)silane as an effective and ecofriendly flame retardant for electrolytes in lithium ion batteriesElectrochemistry Communications, 2009
- Improving electrochemical performance of graphitic carbon in PC-based electrolytes by using N-vinyl-2-pyrrolidone as an additiveElectrochemistry Communications, 2008
- SEI layer-forming additives for LiNi0.5Mn1.5O4/graphite 5V Li-ion batteriesElectrochemistry Communications, 2007
- Cathode materials modified by surface coating for lithium ion batteriesElectrochimica Acta, 2006
- EIS study on the formation of solid electrolyte interface in Li-ion batteryElectrochimica Acta, 2006
- Effect of vinylene carbonate as additive to electrolyte for lithium metal anodeElectrochimica Acta, 2004
- Manganese Dissolution from Lithium Doped Li-Mn-O Spinel Cathode Materials into Electrolyte SolutionElectrochemistry, 2001