Mechanical Properties of Commercial Purity Aluminum Modified by Zirconium Micro-Additives
Open Access
Abstract
The mechanical properties and the fractured surfaces of commercial purity aluminum modified by zirconium micro-additives were investigated by means of experimental examination. A commercial purity Al specimen was used as a reference material and seven Al-Zr alloys in the 0.02–0.14 wt.% Zr composition range (with 0.02 wt.% Zr step) were prepared by microalloying methods. Optical microscopy was used to examine the microstructures and to calculate the grain sizes of the prepared specimens. The phase assemblage diagrams were plotted and the relative amounts of solid phases were calculated at room temperature using FactSage thermochemical software and databases. Proof stress, strength coefficient and strain hardening exponent were measured from the stress-strain curves obtained from tensile experiments and Charpy impact energy was calculated for all specimens. The experiments showed that the grain size of commercial purity Al was reduced by adding any Zr concentration in the investigated composition range, which could be due to the nucleation of new grains at Al3Zr particle sites. Accordingly, the microhardness number, tensile properties and Charpy impact energy were improved, owing to the large grain-boundary areas resulted from the refining effect of Zr, which can limit the movement of dislocations in the refined samples. The basic fracture mode in all specimens was ductile, because Al has an FCC structure and remains ductile even at low temperatures. The ductile fractures took place in a transgranular manner as could be concluded from the fractured surface features, which include voids, ridges and cavitation.Keywords
This publication has 34 references indexed in Scilit:
- Experimental and theoretical confirmation of an orthorhombic phase transition in niobium at high pressure and temperatureCommunications Materials, 2020
- Structural and Mechanical Properties of Ti–Co Alloys Treated by High Pressure TorsionMaterials, 2019
- Mechanical Properties and Wear Behavior of Aluminum Grain Refined by Ti and Ti+BInternational Journal of Surface Engineering and Interdisciplinary Materials Science, 2019
- Effect of hafnium addition on wear resistance of zinc-aluminum 5 alloy: A three-dimensional presentationAdvanced Materials Letters, 2017
- On the high-pressure phase stability and elastic properties of β -titanium alloysJournal of Physics: Condensed Matter, 2017
- Grain refinement mechanism of as-cast aluminum by hafniumTransactions of Nonferrous Metals Society of China, 2016
- Effect of Aging Time to the Commercial Aluminum Alloy Modified with Zirconium AdditionMaterials Science Forum, 2015
- Effect of Fe on grain refinement of commercial purity aluminumMaterials & Design (1980-2015), 2006
- Advanced aluminium alloys for aircraft and aerospace applicationsMaterials & Design (1980-2015), 1988
- The Deformation and Ageing of Mild Steel: III Discussion of ResultsProceedings of the Physical Society. Section B, 1951