A micro-sized Si–CNT anode for practical application via a one-step, low-cost and green method
Open Access
- 1 December 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (86) , 54844-54851
Abstract
Silicon (Si) has been used in Li-ion batteries (LIBs), and considerable progress has been achieved in design and engineering with improved capacity and cycling. However, large-scale application of Si-based anodes is hindered owing to the wide use of toxic raw materials, high manufacturing cost, limited capacity and unpalatable tap density. Herein, we describe a low-cost and green route to solve these problems. Composite Si–carbon nanotube (CNT) spheres were synthesized using a scalable method: rotary spray drying. These spheres were interspersed by many CNTs and wrapped Si nanoparticles (SiNPs) within them. Due to slightly rigid structure of CNTs, many void spaces in spheres could be preserved during the agglomeration of spheres. These voids could accommodate the volume expansion of Si particles and promote a stable integral structure during cycling. Importantly, this micron-grade material could improve the volume density and tap density to achieve high energy density. The prepared material showed promising reversible capacity of 2500 mA h g−1 with retention of 98% during 500 cycles. Ultra-fast discharge–charge (900 mA h g−1 at 20C) was achieved owing to the crosslinking effect between CNTs and SiNPs in these spheres. Moreover, a high-performance Si material was actualized via a simple industrial method rather than a complex synthesis.Keywords
Funding Information
- National Natural Science Foundation of China (21673222)
This publication has 46 references indexed in Scilit:
- Carbon‐Nanotube‐Decorated Nano‐LiFePO4 @C Cathode Material with Superior High‐Rate and Low‐Temperature Performances for Lithium‐Ion BatteriesAdvanced Energy Materials, 2013
- Importance of binder compositions to the dispersion and electrochemical properties of water-based LiCoO2 cathodesJournal of Power Sources, 2013
- Nanostructured silicon for high capacity lithium battery anodesEnergy & Environmental Science, 2010
- Amorphous Carbon-Coated Silicon Nanocomposites: A Low-Temperature Synthesis via Spray Pyrolysis and Their Application as High-Capacity Anodes for Lithium-Ion BatteriesThe Journal of Physical Chemistry C, 2007
- Silicon, graphite and resin based hard carbon nanocomposite anodes for lithium ion batteriesJournal of Power Sources, 2007
- Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cellsJournal of Power Sources, 2007
- Silicon and carbon based composite anodes for lithium ion batteriesJournal of Power Sources, 2006
- Electrochemical Characterizations of Commercial LiCoO[sub 2] Powders with Surface Modified by Li[sub 3]PO[sub 4] NanoparticlesElectrochemical and Solid-State Letters, 2006
- Cage-like carbon nanotubes/Si composite as anode material for lithium ion batteriesElectrochemistry Communications, 2006
- Electrochemical Characterizations on Si and C-Coated Si Particle Electrodes for Lithium-Ion BatteriesJournal of the Electrochemical Society, 2005