A Comparative Study of DES and URANS for Flow Prediction in a Two-Pass Internal Cooling Duct
Authors:
- 14 April 2006
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 128 (6) , 1336-1345
Abstract
The capabilities of the detached eddy simulation (DES) and the unsteady Reynolds averaged Navier-Stokes (URANS) versions of the 1988 model in predicting the turbulent flow field in a two-pass internal cooling duct with normal ribs is presented. The flow is dominated by the separation and reattachment of shear layers; unsteady vorticity induced secondary flows and strong streamline curvature. The techniques are evaluated in predicting the developing flow at the entrance to the duct and downstream of the bend, fully developed regime in the first pass, and in the bend. Results of mean flow quantities, secondary flows, and the average friction factor are compared to experiments and large-eddy simulations (LES). DES predicts a slower flow development than LES, whereas URANS predicts it much earlier than LES computations and experiments. However, it is observed that as fully developed conditions are established, the capability of the base model in predicting the flow is enhanced by the DES formulation. DES accurately predicts the flow both in the fully developed region as well as the bend of the duct. URANS fails to predict the secondary flows in the fully developed region of the duct and is clearly inferior to DES in the bend.
Keywords
This publication has 31 references indexed in Scilit:
- Detached eddy simulation of flow and heat transfer in fully developed rotating internal cooling channel with normal ribsInternational Journal of Heat and Fluid Flow, 2006
- On Prediction of Thermal-Hydraulic Characteristics of Square-Sectioned Ribbed Cooling DuctsJournal of Turbomachinery, 2001
- Comparison between laminar and turbulent heat transfer in a stationary square duct with transverse or angled rib turbulatorsInternational Journal of Heat and Mass Transfer, 2001
- A Numerical Study of Flow and Heat Transfer in a Smooth and Ribbed U-Duct With and Without RotationJournal of Heat Transfer, 2000
- Large eddy simulation with a dynamic subgrid-scale model of turbulent heat transfer in an orthogonally rotating rectangular duct with transverse rib turbulatorsInternational Journal of Heat and Mass Transfer, 2000
- Computation of flow and heat transfer through rotating ribbed passagesInternational Journal of Heat and Fluid Flow, 1998
- The Effect of Periodic Ribs on the Local Aerodynamic and Heat Transfer Performance of a Straight Cooling ChannelJournal of Turbomachinery, 1998
- Heat Transfer in Rotating Serpentine Passages With Selected Model Orientations for Smooth or Skewed Trip WallsJournal of Turbomachinery, 1994
- Reassessment of the scale-determining equation for advanced turbulence modelsAIAA Journal, 1988
- Computations of turbulent flow beyond backward-facing steps using Reynolds-stress closureAIAA Journal, 1985