Reduction of carbon proximity effects by including AlGaN back barriers in HEMTs on free‐standing GaN
Authors:
Open Access
- 1 July 2013
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 49 (14) , 893-895
Abstract
High‐electron‐mobility transistor (HEMT) structures were regrown by molecular beam epitaxy on GaN‐on‐SiC templates and free‐standing (FS) GaN substrates with very low threading dislocation density (TDD). To ensure a high buffer breakdown voltage, the thickness of the unintentionally doped (UID) GaN buffer layer, d UID , was reduced to 200 nm for the HEMTs regrown on FS GaN. A reduction in TDD entailed an increase in the three‐terminal breakdown voltage for passivated HEMTs. With a low d UID , the proximity effects of the carbon‐doped GaN buffer were evident. A power‐added efficiency (PAE) of 37% and continuous‐wave power output ( P out ) of 4.2 W/mm were measured at 4 GHz with a drain bias of 40 V for a HEMT on FS GaN without a back barrier. By including a 5 nm Al 0.3 Ga 0.7 N back barrier, PAE and P out improved to 50% and 6.7 W/mm, respectively, at a drain bias of 40 V.Keywords
This publication has 4 references indexed in Scilit:
- Buffer Design to Minimize Current Collapse in GaN/AlGaN HFETsIEEE Transactions on Electron Devices, 2012
- Effects of Threading Dislocation Density on the Gate Leakage of AlGaN/GaN Heterostructures for High Electron Mobility TransistorsApplied Physics Express, 2011
- GaN-Based RF Power Devices and AmplifiersProceedings of the IEEE, 2008
- Microwave power performance of MBE-grown AlGaN/GaN HEMTs on HVPE GaN substratesElectronics Letters, 2006