Biomechanical Comparison of Short-, Mid-, and Long-Length Proximal Femoral Nails for Femoral Intertrochanteric Fracture (AO/OTA 31A3.3) Fixation
Open Access
- 1 January 2024
- journal article
- research article
- Published by SAGE Publications in Geriatric Orthopaedic Surgery & Rehabilitation
- Vol. 15
Abstract
Introduction: In surgeries for unstable AO/OTA 31A3.3 fractures, surgeons use various lengths of intramedullary nails (IMNs). However, there is insufficient evidence regarding the appropriate nail length for these fractures. This study compared the biomechanical properties of IMNs of different lengths for AO/OTA 31A3.3 fractures. Methods: 30 synthetic femora of AO/OTA 31A3.3 fracture model were randomly assigned to the following three groups: short- (170 mm), mid- (235 mm), and long-length (300 mm) nail groups, and were performed fixation surgery. The translation patterns of the constructs were examined by cyclic testing and compared among three groups. Additionally, changes in the neck–shaft and shaft–nail angles after cyclic testing were evaluated using radiological images. Results: The translation patterns during cyclic loading did not differ among the groups. Conversely, one-way analysis of variance (ANOVA) revealed a significant difference in the neck–shaft angle change (5.8° ± 1.8°, 2.8° ± 1.3°, and 1.9° ± .9° in the short-, mid-, and long-length groups, respectively; P < .001), and post-hoc analysis revealed that the change was greater in the short-length group than in the mid- and long-length groups ( P < .001 and P < .001, respectively). Furthermore, one-way ANOVA revealed a significant difference in the shaft–nail angle change (3.1° ± 2.1°, 1.4° ± 1.4°, and .1° ± .6° in the short-, mid-, and long-length groups, respectively; P < .001), and post-hoc analysis revealed that the change was greater in the short-length group than in the mid- and long-length groups ( P = .044 and P < .001, respectively). Conclusions: Short-length nails were associated with relevant changes in the neck–shaft and shaft–nail angles in our AO/OTA 31A3.3 fracture model. Thus, the selection of mid- or long-length nails instead of short-length nails might be better in IMN surgery for these fractures to prevent postoperative varus deformity.Keywords
This publication has 25 references indexed in Scilit:
- New classification focusing on the relationship between the attachment of the iliofemoral ligament and the course of the fracture line for intertrochanteric fracturesInjury, 2016
- Long versus short cephalomedullary nail for trochanteric femur fractures (OTA 31-A1, A2 and A3): a systematic reviewJournal of Orthopaedics and Traumatology, 2016
- A refined definition improves the measurement reliability of the tip–apex distanceJournal of Orthopaedic Science, 2016
- The femoral neck-shaft angle on plain radiographs: a systematic reviewSkeletal Radiology, 2015
- Biomechanical comparison of long, short, and extended-short nail construct for femoral intertrochanteric fracturesInjury, 2015
- What Makes an Intertrochanteric Fracture Unstable in 2015? Does the Lateral Wall Play a Role in the Decision Matrix?Journal of Orthopaedic Trauma, 2015
- Which Implant Is Better for Treating Reverse Obliquity Fractures of the Proximal Femur: A Standard or Long Nail?Clinical Orthopaedics and Related Research, 2013
- Investigation of the freely available easy-to-use software ‘EZR’ for medical statisticsBone Marrow Transplantation, 2012
- G*Power 3: A flexible statistical power analysis program for the social, behavioral, and biomedical sciencesBehavior Research Methods, 2007
- Two-hole side-plate DHS in the treatment of intertrochanteric fracture: Results and complicationsInjury, 2005