Active control of the seismic response of structures by combined use of base isolation and absorbing boundaries
Authors:
- 1 January 1992
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 21 (6) , 525-541
Abstract
The relative advantages of several control strategies to reduce the seismic response of multi‐storey structures are studied. The strategies involve the separate or combined use of passive base isolation mechanisms and active control forces. The base isolation mechanism is modelled as an equivalent linear soft storey with high damping. The active control forces are selected so that an absorbing boundary is obtained at the top of the structure and non‐reflecting or reflecting boundaries are obtained at the base of the building. It is found that the best results are obtained when a passive base isolation system is combined with an active absorbing boundary placed at the top of the building. However, the incremental gains resulting from adding a base isolation system to a structure already controlled by a roof‐top active absorbing boundary are significant only for relatively soft base isolation systems. Also, the incremental gains appear to decrease as the number of storeys of the structure increases.Keywords
This publication has 9 references indexed in Scilit:
- Flexural wave control of a flexible beam. Proposition of the active sink method.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 1990
- Optimal Control of Power Flow at Structural Junctions1989
- Recent advances in active control of civil engineering structuresProbabilistic Engineering Mechanics, 1988
- Robust control of base-isolated structures under earthquake excitationJournal of Optimization Theory and Applications, 1987
- Wave-absorbing controllers for a flexible beamJournal of Guidance, Control, and Dynamics, 1986
- Aseismic base isolation: review and bibliographySoil Dynamics and Earthquake Engineering, 1986
- Traveling wave control for large spacecraft structuresJournal of Guidance, Control, and Dynamics, 1986
- Concept of Structural ControlJournal of the Structural Division, 1972
- Application of Distributed Parameter Concepts to Dynamic Analysis and Control of Bending VibrationsJournal of Basic Engineering, 1968