Application of Plasma Jet Crystallization Technique to Fabrication of Thin-Film Transistor

Authors:
  • SHSeiichiro Higashi
    Seiichiro Higashi
  • HKHirotaka Kaku
    Hirotaka Kaku
  • HMHideki Murakami
    Hideki Murakami
  • SMSeiichi Miyazaki
    Seiichi Miyazaki
  • HWHajime Watakabe
    Hajime Watakabe
  • NANobuyuki Ando
    Nobuyuki Ando
  • TSToshiyuki Sameshima
    Toshiyuki Sameshima

Abstract
The crystallization of a-Si films on glass substrates using the plasma jet crystallization (PJC) technique and its application to thin-film transistor fabrication were studied. Amorphous Si (a-Si) films deposited by plasma-enhanced chemical vapor deposition (PECVD) of 50% SiH4 diluted with H2 were crystallized by thermal plasma jet under the power of 1.6 to 2.6 kW input to the plasma source and the substrate scan speed of 170 to 1000 mm/s. The crystallinity of the films was improved by treating the films at a higher input power for a longer duration. Thin-film transistors (TFTs) fabricated using the crystallized films showed good electrical characteristics. By increasing the input power from 1.86 to 2.29 kW in the crystallization, the average field-effect mobility was increased from 42 to 61 cm2·V-1·s-1, and the threshold voltage was decreased from 4.0 to 3.4 V. These results indicate that the PJC technique is a very promising low-temperature process technology.

This publication has 18 references indexed in Scilit: