Manipulating Bulk Diffusion and Doping of Phosphomolybdic Acid Enables Organic Solar Cells with Improved Homogeneity
- 3 July 2025
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (28) , 40605-40612
Abstract
The application of organic solar cells (OSCs) significantly contributes to the advancement of sustainable development and the utilization of eco-friendly energy sources. The solution-based phosphomolybdic acid (PMA) doping method has been demonstrated to be effective in simplifying the fabrication of the hole transport layer (HTL) by modulating the optoelectronic properties of the photoactive layer (PAL). Here, the PMA doping method was applied to the state-of-the-art PM6:L8-BO-based OSCs. By laser beam-induced current (LBIC) and time-of-flight-secondary ion mass spectrometry (ToF-SIMS) measurements, we demonstrated that the diffusion of PMA is inhomogeneous with the PM6:L8-BO layer, which yielded poor device performance and broad distribution of power conversion efficiency (PCE) of the cells. To address this issue, a two-step spin-rinsing technique was developed that improved the homogeneity of PMA bulk diffusion over the PAL, leading to significantly improved device performance and narrowed PCE distribution. Most interestingly, this two-step procedure enables manipulation of the vertical diffusion of PMA. This is particularly important in thicker PAL solar cells. The optimized PM6:L8-BO cells with a PAL thickness of 280 nm exhibited an average PCE of 12.96%, which is 0.77% higher than that of the cell with thermal evaporated MoO3 HTL.Keywords
Funding Information
- Xi’an Jiaotong-Liverpool University (FOSA2206023, PGRS1912016)
- Chinese Academy of Sciences (YJKYYQ20180029)
This publication has 25 references indexed in Scilit:
- High Cell to Module Efficiency Remaining Ratio of ≈90% for the 100 cm2 Fully Roll‐to‐Roll Gravure Printed Flexible Organic Solar Cells From Non‐Halogenated SolventAdvanced Materials, 2025
- Recent Advance in Solution‐Processed Hole Transporting Materials for Organic Solar CellsAdvanced Functional Materials, 2023
- Instability mechanism of phosphomolybdic acid solution and its effect on organic solar cells as a hole-transporting layerOrganic Electronics, 2023
- Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar CellsChinese Journal of Polymer Science, 2022
- Controllable synthesis and n-doping of HMoOx nanoparticle inks through simple photoreduction for solution-processed organic photovoltaicsChemical Engineering Journal, 2021
- Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient CoreJoule, 2019
- Large‐Area Organic Solar Cells: Material Requirements, Modular Designs, and Printing MethodsAdvanced Materials, 2018
- A Cost Analysis of Fully Solution‐Processed ITO‐Free Organic Solar ModulesAdvanced Energy Materials, 2018
- A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High PerformanceAdvanced Materials, 2015
- Conductive Conjugated Polyelectrolyte as Hole‐Transporting Layer for Organic Bulk Heterojunction Solar CellsAdvanced Materials, 2013