Many of the earliest experiments in controlled thermonuclear fusion research were Z-pinches. However these pinches were found to be highly unstable to the m = 0, the m = 1 (kink), and the Rayleigh-Taylor instability. The addition of an axial magnetic field and the removal of end losses by proceeding to a toroidal geometry has led to the class of discharges known as tokamaks and the reversed field pinch. But, at fusion temperatures and with practical values of applied magnetic field this restricts the plasma density to 10$^{20}$ to 10$^{21}$ m$^{-3}$, thereby requiring a containment time of several seconds and a plasma radius of about 1 m. Meanwhile studies of the plasma focus, which after its three-dimensional compression closely resembles a Z-pinch, have shown that a plasma of density 10$^{25}$ m$^{-3}$ and temperature 1 keV can be achieved in a narrow filament of radius 1 mm. It has enhanced stability properties which might be attributable to the effects of finite ion Larmor radius. Its neutron yield in deuterium can be as high as 10$^{12}$ per discharge, with a favourable empirical scaling law, but the thermonuclear origin of the neutrons is doubtful because of the evidence of centre-of-mass motion and the formation of electron and ion beams. The development of high voltage, high current pulse technology has permitted the reconsideration of the Z-pinch to attain dense fusion plasmas which might be stabilized by scaling the ion Larmor radius to be comparable with the pinch radius. Experiments at Imperial College show that the plasma remains stationary for about twenty Alfven radial transit times, limited only by the period of the current waveform. Theory indicates that a dense compact Z-pinch can satisfy Lawson conditions with a power input dependent on the enhanced stability time, or, if stable, with ohmic heating balancing axial heat losses. Preliminary results on a laser-initiated Z-pinch are also presented. We have seen that the plasma focus is rich in phenomena and that there are many proposed mechanisms for neutron production. A simplified interpretation could be that at a high line density it is violently m.h.d. unstable, but can form reconnecting bubbles. Because of the axial plasma flow the line density drops continuously, so passing through the finite Larmor radius enhanced stability region and into a region of lower line density where current induced turbulence is important. Filamentation could be important here, but at even lower line densities the discharge will behave as a magnetic diode breaking up into separate electron and ion beams. The aim of the Z-pinch work is to operate as a dense, hot thermonuclear plasma by using large ion Larmor radius effects for stabilization or at least to make the energy loss through instabilities acceptable. Two routes are being explored: the compression of the column to high densities; and the ohmic heating of a laser-initiated high-pressure gas-embedded pinch. Both methods are yielding promising results on the gross stability of the discharges for tens of Alfven radial transit times.