Analytical Modeling and Simulation of the Envelope Surface in Five-Axis Flank Milling With Cutter Runout
- 1 April 2012
- journal article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 134 (2) , 021010
Abstract
The cutter runout effect has significant influence on the shape of the cutter swept surface and the machining surface quality. Due to the existence of cutter runout effect, the shape and position of envelope surface formed by each cutter edge are different from others. Hence, it is necessary to integrate the cutter runout effect and its resulting compound effects of all cutter edges into envelope surface modeling and form error prediction for five-axis milling. This paper establishes the envelope surface model considering cutter runout effect in five-axis flank milling based on the relative motion analysis of the cutter and part. In this model, the cutter runout is defined by three parameters, including inclination angle, location angle, and offset value, and the cutter runout effect is subsequently integrated into the model by using the cutter edge as the generatrix of cutter rotation surface. Then, the influence of each runout parameter on the shape of envelope surface formed by each cutter edge as well as the resulting form error in milling is investigated. Also, the compound effects of all cutter edges on the final resulting geometric errors of the machined surface are analyzed. Finally, simulations and machining experiment are conducted for a specific ruled surface, and the results validate the effectiveness and feasibility of proposed envelope surface model considering cutter runout effect. It is suitable to be used in tool positioning, tool installation adjustment, and forming error prediction in flank milling process with cutter runout.Keywords
This publication has 28 references indexed in Scilit:
- Effective Determination of Feed Direction and Tool Orientation in Five-Axis Flat-End MillingJournal of Manufacturing Science and Engineering, 2010
- An Approach to Modeling Cutting Forces in Five-Axis Ball-End Milling of Curved Geometries Based on Tool Motion AnalysisJournal of Manufacturing Science and Engineering, 2010
- Dynamics and Stability of Five-Axis Ball-End MillingJournal of Manufacturing Science and Engineering, 2010
- Optimize tool paths of flank milling with generic cutters based on approximation using the tool envelope surfaceComputer-Aided Design, 2009
- Analytical calculation of the envelope surface for generic milling tools directly from CL-data based on the moving frame methodComputer-Aided Design, 2009
- Cutter-Workpiece Engagement Calculations by Parallel Slicing for Five-Axis Flank Milling of Jet Engine ImpellersJournal of Manufacturing Science and Engineering, 2008
- Virtual Five-Axis Flank Milling of Jet Engine Impellers—Part I: Mechanics of Five-Axis Flank MillingJournal of Manufacturing Science and Engineering, 2008
- Improved positioning of cylindrical cutter for flank milling ruled surfacesComputer-Aided Design, 2005
- Accurate tool position for five-axis ruled surface machining by swept envelope approachComputer-Aided Design, 2004
- Accurate 5-Axis Machining of Twisted Ruled SurfacesJournal of Manufacturing Science and Engineering, 2001