Municipal solid waste generation and its compositional assessment for efficient and sustainable infrastructure planning in an intermediate city of Pakistan
- 3 April 2022
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 44 (21) , 3196-3214
Abstract
It is imperative to design and operate sustainable solid waste management (SWM) systems in cities based on the results of waste amount and characterization study (WACS). In this work, WACS was conducted, and results were used to design an SWM system for an intermediate city of Pakistan. The study revealed that about 110 tons of solid waste per day is generated with a per capita rate of 0.337 kg/day. Around 51.2 of mixed municipal solid waste (MSW) is organic in nature, and its non-scientific disposal is resulting in higher greenhouse gas (GHG) emissions. It was also found that more than 80 of valuables are taken away by the informal sector during the transfer of MSW from the generation source to the dumping site. Ultimate analyses showed that the moisture content (MC) and carbon to nitrogen (C:N) ratio were 64.23 and 51.14 , respectively. Proximate analysis revealed that moisture and calorific value were 57 and 3505 BTU/lb., respectively. Based on these results, a material sorting facility (MSF) was proposed, with an estimated investment cost of US $3.64 million. However, efficiency of the existing collection system is limited to 32 only. In order to improve the collection efficiency (>90 ), an additional investment of US $1.638 million was estimated with an operations and maintenance (O&M) cost of US $19.25 per ton. Existing non-scientific MSW disposal practices contribute 32079.61 CO e tons/year of GHG emissions. The proposed MSF followed by composting is estimated to reduce GHG emissions by 38 to 19722.38 CO e tons/year.
Keywords
This publication has 44 references indexed in Scilit:
- Evaluation of Organic Wastes for CompostingCommunications in Soil Science and Plant Analysis, 2014
- Solid Waste Management Issues in Small Towns of Developing World: A Case Study of Taxila CityInternational Journal of Environmental Science and Development, 2012
- Comparative measurements of the energy consumption of 51 electric, hybrid and internal combustion engine vehiclesTransportation Research Part D: Transport and Environment, 2011
- Municipal Solid Waste Management in Moradabad City, IndiaJournal of the Indian Society of Remote Sensing, 2011
- Characterisation and composition of Municipal Solid Waste (MSW) generated in Sangamner City, District Ahmednagar, Maharashtra, IndiaEnvironmental Monitoring and Assessment, 2009
- Studying municipal solid waste generation and composition in the urban areas of BhutanWaste Management & Research: The Journal for a Sustainable Circular Economy, 2009
- Landfilling of waste: accounting of greenhouse gases and global warming contributionsWaste Management & Research: The Journal for a Sustainable Circular Economy, 2009
- Municipal solid waste management in Lahore City District, PakistanWaste Management, 2009
- Assessment of the status of municipal solid waste management in metro cities, state capitals, class I cities, and class II towns in India: An insightWaste Management, 2009
- Municipal solid waste characteristics and management in Allahabad, IndiaWaste Management, 2007