Rheological Performance of Magnetorheological Grease with Embedded Graphite Additives
Authors:
- Nur Alyaa Mohd NasirNNNur Alyaa Mohd Nasir
- Nurhazimah NazmiNNNurhazimah Nazmi
- Norzilawati MohamadNMNorzilawati Mohamad
- Ubaidillah UbaidillahUbaidillah Ubaidillah
- Nur Azmah NordinNNNur Azmah Nordin
- Saiful Amri MazlanSMSaiful Amri Mazlan
- Siti Aishah Abdul AzizSiti Aishah Abdul Aziz
- Muhammad Kashfi ShabdinMSMuhammad Kashfi Shabdin
- Nurul Azhani YunusNYNurul Azhani Yunus
Open Access
- 6 September 2021
- Vol. 14 (17) , 5091
Abstract
The use of highly viscous grease as a medium in magnetorheological grease (MRG) provides the benefit of avoiding sedimentation from occurring. However, it limits the expansion of yield stress in the on-state condition, thus reducing the application performance during operation. Therefore, in this study, the improvement in the rheological properties of MRG was investigated through the introduction of graphite as an additive. MRG with 10 wt % graphite (GMRG) was fabricated, and its properties were compared to a reference MRG sample. The microstructure of GMRG was characterized using an environmental scanning electron microscope (ESEM). The rheological properties of both samples, including apparent viscosity, yield stress, and viscoelasticity, were examined using a shear rheometer in rotational and oscillatory modes. The results demonstrated a slight increase in the apparent viscosity in GMRG and a significant improvement in yield stress by 38.8% at 3 A with growth about 32.7% higher compared to MRG from 0 to 3 A. An expansion of the linear viscoelastic region (LVE) from 0.01% to 0.1% was observed for the GMRG, credited to the domination of the elastic properties on the sample. These obtained results were confirmed based on ESEM, which described the contribution of graphite to constructing a more stable chain structure in the GMRG. In conclusion, the findings highlight the influence of the addition of graphite on improving the rheological properties of MRG. Hence, the addition of graphite in MRG shows the potential to be applied in many applications in the near future.Keywords
Funding Information
- Ministry of Higher Education under Fundamental Research Grant Scheme (FRGS/1/2020/TK0/UTM/02/57)
- Skim Pensyarah Lantikan Baru (SLB2111)
- Collaborative Research Grant (CRG) UTM-National 2019, Cost Center (015MCO-022)
This publication has 40 references indexed in Scilit:
- Microstructure and magnetorheology of graphite-based MR elastomersRheologica Acta, 2011
- A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer compositesProgress in Polymer Science, 2011
- Atomic Force Microscopy and Thermo-Rheological Characterisation of Lubricating GreasesTribology Letters, 2010
- Effect of rheological behaviour of lithium greases on the friction processIndustrial Lubrication and Tribology, 2008
- A Comparative Study of Magnetorheological-Fluid-Brake and Magnetorheological-Grease-BrakeTribology Online, 2008
- The influence of graphite solid additives, MoS2 and PTFE on changes in shear stress values in lubricating greasesJournal of Synthetic Lubrication, 2007
- Thermorheological behaviour of a lithium lubricating greaseTribology Letters, 2006
- Study of magnetorheological fluids at high shear ratesRheologica Acta, 2006
- Harmonic analysis in grease rheologyJournal of Applied Polymer Science, 2003
- Rheological properties and stability of magnetorheological fluids using viscoelastic medium and nanoadditivesKorean Journal of Chemical Engineering, 2001