Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten via Spark Plasma Sintering
Open Access
Abstract
Highly uniform oxide dispersion-strengthened materials W–1 wt % Nd2O3 and W–1 wt % CeO2 were successfully fabricated via a novel wet chemical method followed by hydrogen reduction. The powders were consolidated by spark plasma sintering at 1700 °C to suppress grain growth. The samples were characterized by performing field emission scanning electron microscopy and transmission electron microscopy analyses, Vickers microhardness measurements, thermal conductivity, and tensile testing. The oxide particles were dispersed at the tungsten grain boundaries and within the grains. The thermal conductivity of the samples at room temperature exceeded 140 W/m·K. The tensile tests indicated that W–1 wt % CeO2 exhibited a ductile–brittle transition temperature between 500 °C and 550 °C, which was a lower range than that for W–1 wt % Nd2O3. Surface topography and Vickers microhardness analyses were conducted before and after irradiations with 50 eV He ions at a fluence of 1 × 1022 m−2 for 1 h in the large-powder material irradiation experiment system. The grain boundaries of the irradiated area became more evident than that of the unirradiated area for both samples. Irradiation hardening was recognized for the W–1 wt % Nd2O3 and W–1 wt % CeO2 samples.Keywords
This publication has 22 references indexed in Scilit:
- Grain growth behavior and mechanical properties of zirconium micro-alloyed and nano-size zirconium carbide dispersion strengthened tungsten alloysInternational Journal of Refractory Metals and Hard Materials, 2015
- Preparation and characteristics of W–1wt.% TiC alloy via a novel chemical method and spark plasma sinteringPowder Technology, 2015
- Dislocations mediate hydrogen retention in tungstenNuclear Fusion, 2014
- Thermal response of nanostructured tungstenNuclear Fusion, 2014
- Preparation and characterization of potassium doped tungstenJournal of Nuclear Materials, 2013
- Bulk tungsten with uniformly dispersed La2O3 nanoparticles sintered from co-precipitated La2O3/W nanoparticlesJournal of Nuclear Materials, 2013
- Nanostructured high-strength molybdenum alloys with unprecedented tensile ductilityNature Materials, 2013
- Preparation of La2O3 doped ultra-fine W powders by hydrothermal-hydrogen reduction processInternational Journal of Refractory Metals and Hard Materials, 2013
- Structural characterization of mechanically milled and annealed tungsten powderPowder Technology, 2012
- Superplastic deformation in W–0.5wt.% TiC with approximately 0.1μm grain sizeMaterials Science and Engineering: A, 2008