Experimental investigation and analysis of factors influencing delamination and surface roughness of hybrid GFRP laminates using Taguchi technique
- 7 November 2016
- journal article
- research article
- Published by Emerald Publishing in Pigment & Resin Technology
- Vol. 45 (6) , 463-475
Abstract
Purpose: The paper aims to develop a mathematical model for delamination and surface roughness during end milling by using response surface methodology (RSM) and to determine how the input parameters (cutting speed, depth of cut, helix angle and feed rate) influence the output response (delamination and surface roughness) in machining of hybrid glass fibre reinforced plastic (GFRP; Abaca and Glass) composite using solid carbide end mill cutter. Design/methodology/approach: Four-factor, three-level Taguchi orthogonal array design in RSM is used to carry out the experimental investigation. The “Design Expert 8.0” is used to analyse the data collected graphically. Analysis of variance is carried out to validate the model and for determining the most significant parameter. Findings: The feed rate is the cutting parameter which has greater influence on delamination (88.39 per cent), and cutting speed is the cutting parameter which has greater influence on surface roughness (53.42 per cent) for hybrid GFRP composite materials. Both surface roughness and delamination increase as feed rate increases, which means that the composite damage is larger for higher feed rates. Originality/value: Effect of milling of hybrid GFRP composite on delamination and surface roughness with various helix angles of solid carbide end mill has not been analysed yet using RSM.Keywords
This publication has 15 references indexed in Scilit:
- An experimental study for optimization of electrical discharge turning (EDT) processJournal of Materials Processing Technology, 2008
- Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element studyMaterials & Design (1980-2015), 2008
- New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) toolsMaterials & Design (1980-2015), 2007
- Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer compositesMaterials & Design (1980-2015), 2006
- A new machinability index in turning fiber reinforced plasticsJournal of Materials Processing Technology, 2005
- Modelling of machinability parameters of carbon–carbon composite—a response surface approachJournal of Materials Processing Technology, 2004
- A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA)Composite Structures, 2004
- Surface Roughness Prediction Model in Machining of Carbon Steel by PVD Coated Cutting ToolsAmerican Journal of Applied Sciences, 2004
- Evaluation of PCD tool performance during machining of carbon/phenolic ablative compositesJournal of Materials Processing Technology, 2000
- Effect of fibre direction on surface roughness measurements of machined graphite/epoxy compositeComposites Manufacturing, 1993