Influence of the base design on the accuracy of additive manufactured casts measured using a coordinate measuring machine
Authors:
Open Access
- 1 January 2022
- journal article
- research article
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 66 (1) , 68-74
Abstract
Purpose: To measure the accuracy of the additively manufactured casts with 3 base designs: solid, honeycomb-structure, and hollowed bases. Methods: A virtual cast was used to create different base designs: solid (S Group), honeycomb-structure (HC group), and hollowed (H group). Three standard tessellation language files were used to fabricate the specimens using a material jetting printer (J720 Dental; Stratasys) and a resin (VeroDent MED670; Stratasys) (n=15). A coordinate measuring machine was selected to measure the linear and 3D discrepancies between the virtual cast and each specimen. Shapiro-Wilk test revealed that all the data was not normally distributed (P<.05). Kruskal Wallis and Mann Whitney U tests were used (α=.05). Results: The S group obtained a median ±interquartile range 3D discrepancy of 53.00 ±73.25 µm, the HC group of 58.00 ±67.25 µm, and the H group of 34.00 ±45.00 µm. Significant differences were found in the x- (P<.001), y- (P<.001), and z-axes (P<.001), and 3D discrepancies among the groups (P<.001). Significant differences were found between the S and H groups (P=.002) and HC and H groups (P<.001) on the x-axis; S and H groups (P<.001) and HC and H groups (P<.001) on the y-axis; S and H groups (P<.001) and HC and H groups (P<.001) on the z-axis; and S and H groups (P<.001) and HC and H groups (P<.001) on the 3D discrepancy. Conclusions: The base designs influenced on the accuracy of the casts but all the specimens obtained a clinically acceptable manufacturing range. The H group obtained the highest accuracy.Keywords
This publication has 34 references indexed in Scilit:
- Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorationsThe Journal of Prosthetic Dentistry, 2016
- The effect of the angle of acuteness of additive manufactured models and the direction of printing on the dimensional fidelity: clinical implicationsOdontology, 2016
- Diagnostic accuracy and measurement sensitivity of digital models for orthodontic purposes: A systematic reviewAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2016
- Intra‐arch dimensional measurement validity of laser‐scanned digital dental models compared with the original plaster models: a systematic reviewOrthodontics & Craniofacial Research, 2015
- Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniquesAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2014
- Effects of environmental conditions, aging, and build orientations on the mechanical properties of ASTM type I specimens manufactured via stereolithographyRapid Prototyping Journal, 2012
- Understanding the meaning of accuracy, trueness and precisionAccreditation and Quality Assurance, 2006
- Influence of layer thickness on mechanical properties in stereolithographyRapid Prototyping Journal, 2006
- Complete 3-D reconstruction of dental cast shape using perceptual groupingIEEE Transactions on Medical Imaging, 2001
- Determining optimal parameters for stereolithography processes via genetic algorithmJournal of Manufacturing Systems, 2000