Analysis of Spindle AE Signals and Development of AE-Based Tool Wear Monitoring System in Micro-Milling
Open Access
- 7 April 2022
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 6 (2) , 42
Abstract
Acoustic emission (AE) signals collected from different locations might provide various sensitivities to tool wear condition. Studies for tool wear monitoring using AE signals from sensors on workpieces has been reported in a number of papers. However, it is not feasible to implement in the production line. To study the feasibility of AE signals obtained from sensors on spindles to monitor tool wear in micro-milling, AE signals obtained from the spindle housing and workpiece were collected simultaneously and analyzed in this study for micro tool wear monitoring. In analyzing both signals on tool wear monitoring in micro-cutting, a feature selection algorithm and hidden Markov model (HMM) were also developed to verify the effect of both signals on the monitoring system performance. The results show that the frequency responses of signals collected from workpiece and spindle are different. Based on the signal feature/tool wear analysis, the results indicate that the AE signals obtained from the spindle housing have a lower sensitivity to the micro tool wear than AE signals obtained from the workpiece. However, the analysis of performance for the tool wear monitoring system demonstrates that a 100% classification rate could be obtained by using spindle AE signal features with a frequency span of 16 kHz. This suggests that AE signals collected on spindles might provide a promising solution to monitor the wear of the micro-mill in micro-milling with proper selection of the feature bandwidth and other parameters.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 110-2218-E-002-038.)
This publication has 33 references indexed in Scilit:
- IN-PROCESS TOOL CONDITION MONITORING USING ACOUSTIC EMISSION SENSOR IN MICROENDMILLINGMachining Science and Technology, 2013
- Multi-category micro-milling tool wear monitoring with continuous hidden Markov modelsMechanical Systems and Signal Processing, 2009
- Tool condition and machined surface monitoring for micro-lens array fabrication in mechanical machiningJournal of Materials Processing Technology, 2008
- Investigation of micro-cutting operationsInternational Journal of Machine Tools and Manufacture, 2006
- HMMs for diagnostics and prognostics in machining processesInternational Journal of Production Research, 2005
- Acoustic emission monitoring for the diamond machining of oxygen-free high-conductivity copperJournal of Materials Processing Technology, 2002
- A brief review: acoustic emission method for tool wear monitoring during turningInternational Journal of Machine Tools and Manufacture, 2002
- Tool wear condition monitoring in drilling operations using hidden Markov models (HMMs)International Journal of Machine Tools and Manufacture, 2001
- Sensor signals for tool-wear monitoring in metal cutting operations—a review of methodsInternational Journal of Machine Tools and Manufacture, 2000
- Micro-end-milling—III. Wear estimation and tool breakage detection using acoustic emission signalsInternational Journal of Machine Tools and Manufacture, 1998