Effect of Prepolymerization Time on Morphology and Properties of Epoxy-modified Bismaleimide Foams
Authors:
- 1 November 2012
- journal article
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 27 (5) , 617-625
Abstract
Epoxy-modified bismaleimide (BMI) foams were prepared through prepolymerization and foaming. Density-adjustable BMI foams with closed-cell structures were produced. The influence of prepolymerization time on bubble growth and morphology, as well as the compressive and heat resistant properties of the foams, were thoroughly investigated. BMI prepolymerization was an effective method for controlling the bubble growth rate, the bubble size and its distribution, and the foam density. As the prepolymerization time increased, the matrix viscosity, the number of cells per unit volume and the foam density increased, whereas, the bubble growth rate and cell size decreased, and the cell size distribution became narrower. The compressive strength and modulus increased with increasing prepolymerization time. The dimensional stability temperatures of the BMI foams were all above 200°C, as determined by their base materials, and were unaffected by prepolymerization time.Keywords
This publication has 19 references indexed in Scilit:
- The physical properties of polyurethane/graphite nanosheets/carbon black foaming conducting nanocompositesComposites Part A: Applied Science and Manufacturing, 2010
- An Enhanced Vacuum Cure Technique for On-Aircraft Repair of Carbon-Bismaleimide CompositesApplied Composite Materials, 2010
- Rheological control in foaming polymeric materials: I. Amorphous polymersPolymer, 2010
- Structure and properties of closed‐cell foam prepared from irradiation crosslinked silicone rubberJournal of Applied Polymer Science, 2009
- Foaming of poly(methyl methacrylate) particlesMaterials Science and Engineering: C, 2009
- Mechanical properties of polyethersulfone modified epoxy/3,3′-bis (maleimidophenyl)phenylphosphine oxide (BMI) intercrosslinked matricesBulletin of Materials Science, 2008
- A new technique for foaming submicron size poly(methyl methacrylate) particlesJournal of Applied Polymer Science, 2007
- Processing Characteristics of TEEK Polyimide FoamHigh Performance Polymers, 2004
- Polystyrene foams. II. Structure–impact properties relationshipsJournal of Applied Polymer Science, 2003
- Studies on thermal and morphological behavior of siliconized epoxy bismaleimide matricesJournal of Applied Polymer Science, 2001