Estimation of Combustion Variability Using In-cylinder Ionization Measurements
- 24 September 2001
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper investigates the use of the ionization current to estimate the Coefficient of Variation for the Indicated Mean Effective Pressure, COV(IMEP), which is a common variable for combustion stability in a spark ignited engine. Stable combustion in this definition implies that the variance of the produced work, measured over a number of consecutive combustion cycles, is small compared to the mean of the produced work. The COV(IMEP) is varied experimentally either by increasing EGR flow or by changing the air-fuel ratio, in both a laboratory setting (engine in dynamometer) and in an on-road setting. The experiments show a positive correlation between COV(Ion integral), the Coefficient of Variation for the integrated Ion Current, and COV(IMEP), when measured under low load on an engine in a dynamometer, but not under high load conditions. On-road experiments show a positive correlation, but only in the EGR and the lean burn case. An approach based on individual cycle classification for real time estimation of combustion stability is discussed.Keywords
This publication has 4 references indexed in Scilit:
- Limitations of Ionization Current Sensors and Comparison with Cylinder Pressure SensorsSAE International Journal of Advances and Current Practices in Mobility, 2000
- Ion Sensing for Combustion Stability Control of a Spark Ignited Direct Injected EngineSAE International Journal of Advances and Current Practices in Mobility, 2000
- Robust AFR Estimation Using the Ion Current and Neural NetworksSAE International Journal of Advances and Current Practices in Mobility, 1999
- Local Air-Fuel Ratio Measurements Using the Spark Plug as an Ionization SensorSAE International Journal of Advances and Current Practices in Mobility, 1997