Mechanical and Dielectric Properties of Two Types of Si3N4 Fibers Annealed at Elevated Temperatures
Open Access
Abstract
The mechanical and dielectric properties of two types of amorphous silicon nitride (Si3N4) fibers prior to and following annealing at 800 °C were studied. The tensile strengths of the Si3N4 fiber bundles were measured using unidirectional tensile experimentation at room temperature, whereas the permittivity values were measured at 8.2–12.4 GHz using the waveguide method. The results demonstrated that the tensile strength and dielectric properties of Si3N4 fibers were correlated to the corresponding composition, microstructure, and intrinsic performance of electrical resistance. The Si3N4 fibers with a lower content of amorphous SiNxOy presented an improved thermal stability, a higher tensile strength, a higher conductivity, and a significantly stable wave-transparent property. These were mainly attributed to the highly pure composition and decomposition of less amorphous SiNxOy.Keywords
Funding Information
- Chinese National Foundation for Natural Sciences under Contracts (No. 51632007)
- Nature Science Foundation of China (51602258, 51672217, 51472201)
This publication has 34 references indexed in Scilit:
- Silicon nitride: the engineering material of the futureJournal of Materials Science, 2011
- Analysis of existing radioparent refractory materials, composites and technology for creating high-speed rocket radomes. Part 2. Comparative analysis of the main properties of materials used for creating rocket radomesRefractories and Industrial Ceramics, 2010
- Silicon Nitride for High‐Temperature ApplicationsJournal of the American Ceramic Society, 2010
- ELECTROMAGNETIC OPTIMAL DESIGN AND PREPARATION OF BROADBAND CERAMIC RADOME MATERIAL WITH GRADED POROUS STRUCTUREProgress In Electromagnetics Research, 2010
- Low-observable radomes composed of composite sandwich constructions and frequency selective surfacesComposites Science and Technology, 2008
- Interface Structure and Atomic Bonding Characteristics in Silicon Nitride CeramicsScience, 2004
- Effect of the residual phases in β-Si3N4 seed on the mechanical properties of self-reinforced Si3N4 ceramicsJournal of the European Ceramic Society, 2003
- Processing, microstructure, mechanical properties of Si3N4 obtained by slip casting and pressureless sinteringCeramics International, 2001
- Silicon Nitride and Related MaterialsJournal of the American Ceramic Society, 2000
- Si3N4 and Si2N2O for high performance radomesMaterials Science and Engineering, 1985