Study on Growth Mechanism and Characteristics of Zirconium Alloy Micro-Arc Oxidation Film
Open Access
Abstract
Ceramic coatings on R60705 zirconium alloy were prepared on the surface by the micro-arc oxidation (MAO) technique in electrolytes containing Na2SiO3, NaOH, and Na2EDTA. The growth behavior of the MAO ceramic coatings at different stages, including growth rate, microstructure, and phase composition, was investigated using the method of direct observation of the boundary area. The results showed that the growth of the MAO coatings on R60705 zirconium alloy occurred in both inward and outward directions. At an oxidation time of 5 min, the thickness of the oxidation layer increased fastest, reaching 103.43 μm, with a growth rate of 0.345 μm/s. After 5 min, the growth rate decreased and tended to level off around 15 min, with a thickness and growth rate of 162.7 μm and 0.181 μm/s, respectively. The total thickness of the coatings continuously increased throughout the process, with the outward growth thickness always higher than the inward growth thickness. The composition of the zirconium alloy micro-arc oxidation coatings mainly consisted of monoclinic zirconia (m-ZrO2), tetragonal zirconia (t-ZrO2), and a small amount of SiO2. The main elements in the coatings were Zr, O, and Si. The corrosion resistance of the zirconium alloy micro-arc oxidation coatings increased first and then decreased with increasing oxidation time, with a corrosion current density of 8.876 × 10−9 A·cm−2 at 15 min, indicating the best corrosion resistance.Keywords
Funding Information
- University Science Foundation for Young Science and Technology Talents in Inner Mongolia Autonomous Region of China (NJYT22078, JY20220059, 51964035, 2018LH05034)
- Research Funds for Universities of Autonomous Region (NJYT22078, JY20220059, 51964035, 2018LH05034)
- National Natural Science Foundation of China (NJYT22078, JY20220059, 51964035, 2018LH05034)
- Natural Science Foundation of Inner Mongolia Autonomous Region (NJYT22078, JY20220059, 51964035, 2018LH05034)
This publication has 9 references indexed in Scilit:
- The study of hydroxyapatite growth kinetics on CP – Ti and Ti65Zr treated by Plasma electrolytic oxidation processJournal of Materials Research and Technology, 2023
- The improved corrosion and wear properties of Ti-Zr based alloys with oxide coating in simulated seawater environmentSurface and Coatings Technology, 2022
- Micro‐arc oxidation of magnesium alloys: A reviewJournal of Materials Science & Technology, 2022
- Effect of Fe 3+ and F − on black micro‐arc oxidation ceramic coating of magnesium alloyInternational Journal of Applied Ceramic Technology, 2022
- Effect of Pulse Frequency on Phase Composition and Properties of Amorphous Zirconium Alloy Micro-arc Oxidation CoatingJournal of Physics: Conference Series, 2022
- Characterization and in vitro properties of anti-bacterial Ag-based bioceramic coatings formed on zirconium by micro arc oxidation and thermal evaporationSurface and Coatings Technology, 2017
- Growth process and corrosion resistance of ceramic coatings of micro-arc oxidation on Mg-Gd-Y magnesium alloysJournal of Rare Earths, 2010
- IN SITU IMPEDANCE CHARACTERISTICS OF ZIRCONIUM ALLOY CORROSION IN HIGH TEMPERATURE AND PRESSURE WATER ENVIRONMENTACTA METALLURGICA SINICA, 2010
- Effect of NaAlO2 concentrations on microstructure and corrosion resistance of Al2O3/ZrO2 coatings formed on zirconium by micro-arc oxidationApplied Surface Science, 2010