Deformation and Failure Characteristics of Bimaterial Samples Consisting of Sandstone and Cemented Coal Gangue–Fly Ash Backfill under Uniaxial Loading
Open Access
Abstract
Based on the acoustic emission (AE) system and the digital scattered-spot deformation monitoring system, uniaxial compression tests were conducted on composite samples consisting of sandstone and cemented coal gangue–fly ash backfill (CGFB) to investigate their deformation and failure characteristics. The results showed that the average uniaxial compressive strength of the composite samples was 83.09% higher than that of the pure CGFB samples and 92.28% lower than that of the pure sandstone samples. In the composite samples, damage occurred in the CGFB part, and they showed obvious plastic damage characteristics. On both sides of the intersection, the sandstone and the CGFB deformed synergistically in the absence of a macroscopic failure. After a macroscopic failure, the interface effect promoted sandstone deformation and restrained CGFB deformation, transforming the sandstone and the CGFB on both sides of the intersection into a nonsynergistically deformed state. The interface effect had the most obvious influence on the horizontal deformation of the sandstone and CGFB monitoring points near the intersection. The failure of the CGFB samples induced sandstone springback deformation with a springback capacity of 0.0089 mm in the vertical direction and 0.0055 mm in the horizontal direction, which led to the further rupture and failure of the CGFB.Keywords
Funding Information
- National Natural Science Foundation of China (52274128, 51904167, 52074169)
- Taishan Scholars Project
- SDUST Research Fund (2018TDJH102)
- Open Fund Research Project
- State Key Laboratory of Strata Intelligent Control and Green Mining (MDPC2022ZR02)
This publication has 32 references indexed in Scilit:
- Mechanical properties of oil shale-coal composite samplesInternational Journal of Rock Mechanics and Mining Sciences, 2019
- Stress–Energy Mechanism for Rock Failure Evolution Based on Damage Mechanics in Hard RockRock Mechanics and Rock Engineering, 2019
- Bed separation backfill to reduce surface cracking due to mining under thick and hard conglomerate: a case studyRoyal Society Open Science, 2019
- Changes in subsidence-field surface movement in shallow-seam coal miningJournal of the Southern African Institute of Mining and Metallurgy, 2019
- Effects of curing temperature on shear behaviour of cemented paste backfill-rock interfaceInternational Journal of Rock Mechanics and Mining Sciences, 2018
- Microstructure and thermal conductivity of cement-based foam:A reviewJournal of Building Engineering, 2018
- Benefits of aggregates surface modification in concrete productionIOP Conference Series: Earth and Environmental Science, 2017
- Investigation of Hydraulic-Mechanical Properties of Paste Backfill Containing Coal Gangue-Fly Ash and Its Application in an Underground Coal MineEnergies, 2017
- An overview of integrated surface subsidence-reducing technology in mining areas of ChinaNatural Hazards, 2015
- Size effect of concrete samples on the kinetics of external sulfate attackCement and Concrete Composites, 2012