Influence of ZrO2 Nanoparticles on the Microstructural Development of Cement Mortars with Limestone Aggregates
Open Access
- 12 February 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (3) , 598
Abstract
In this research, the effect of the addition of zirconium oxide-synthesized nanoparticles on the microstructural development and the physical–mechanical properties of cement mortars with limestone aggregates was studied. Zirconia nanoparticles were synthesized using the co-precipitation method. According to XRD analysis, a mixture of tetragonal (t) and monoclinic (m) zirconia phases was obtained, with average crystallite sizes around 15.18 and 17.79 nm, respectively. Based on the ASTM standards, a mixture design was obtained for a coating mortar with a final sand/cement ratio of 1:2.78 and a water/cement ratio of 0.58. Control mortars and mortars with ZrO2 additions were analyzed for two stages of curing of the mortar—7 and 28 days. According to SEM analysis, mortars with ZrO2 revealed a microstructure with a high compaction degree and an increase in compressive strength of 9% on the control mortars. Due to the aggregates’ characteristics, adherence with the cement paste in the interface zone was increased. It is suggested that the reinforcing effect of ZrO2 on the mortars was caused by the effect of nucleation sites in the main phase C–S–H and the inhibition of the growth of large CH crystals, and the filler effect generated by the nanometric size of the particles. This produced a greater compaction volume, suggesting that faults are probably originated in the aggregates.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación (1125)
This publication has 24 references indexed in Scilit:
- Experimental characterization of mechanical properties of the cement-aggregate interface in concreteConstruction and Building Materials, 2018
- Effect of Aggregate Mineralogy and Concrete Microstructure on Thermal Expansion and Strength Properties of ConcreteApplied Sciences, 2017
- Influence of aggregate type on conversion and strength in calcium aluminate cement concreteCement and Concrete Research, 2017
- Nanoscience of Cement and ConcreteMaterials Today: Proceedings, 2017
- Effect of Particle Shape of Limestone Manufactured Sand and Natural Sand on ConcreteProcedia Engineering, 2017
- Pore size distribution of cement mortar prepared with crushed limestone sandKSCE Journal of Civil Engineering, 2016
- Nanotechnology: Advantages and drawbacks in the field of construction and building materialsConstruction and Building Materials, 2011
- Nanotechnology in concrete – A reviewConstruction and Building Materials, 2010
- Effect of limestone aggregate type and water–cement ratio on concrete strengthMaterials Letters, 2004
- Aggregate-cement paste interfaceCement and Concrete Research, 1999