Bonding Performance of Concrete Structure Strengthened with Ultra-High-Performance Concrete Under Bending Experiment
Open Access
- 19 December 2024
- Vol. 14 (12) , 4040
Abstract
Ultra-high-performance concrete is widely used in bridge strengthening to improve mechanical performance and bridge durability. Interfacial bonding performance is a key factor in ensuring the effectiveness of ultra-high-performance concrete strengthening. The bending test of the UHPC–NC composite structure was carried out in this article. The effects of groove treatment type and epoxy resin bonding were considered to discuss the damage modes, load–deflection relationships, and strengths. The interfacial tensile strength of the UHPC–NC composite structure and the distribution pattern of cracks were clarified. The results of the test showed that (a) only 22.2% of the groove-treated specimens failed due to bonding surface failure, indicating that the UHPC–NC bonding surface has a high degree of reliability; (b) the strength of specimens with an epoxy adhesive interface was the lowest. It was only 21% higher than the pure normal concrete specimen, and the effective synergistic force of UHPC–NC cannot be achieved; (c) the specimens treated with a positive trapezoidal keyway exhibited the highest strength, with an increase of approximately 200% compared to the pure normal concrete specimens. The strength of bending specimens with right-angled and inverted trapezoidal grooves increased by approximately 100% compared with pure normal concrete specimens. Based on the established three-dimensional numerical model and the analysis of test results under economic and safe conditions, the positive trapezoidal keyway specimen exhibits superior interfacial bonding–tensile performances.Keywords
Funding Information
- the Technology Project of Transportation Department of Guizhou Province (2024-122-001)
This publication has 28 references indexed in Scilit:
- Effect of vehicle-induced vibration on the strength, nano-mechanical properties, and microstructural characteristics of ultra-high-performance concrete during hardening processCement and Concrete Composites, 2024
- The bond properties between UHPC and stone under different interface treatment methodsConstruction and Building Materials, 2022
- Cracking Resistance of UHPC-NC Structure in Negative Moment Zone of Prestressed Concrete Beam BridgesArabian Journal for Science and Engineering, 2022
- Capillary rise height of sulfate in Portland-limestone cement concrete under physical attack: Experimental and modelling investigationCement and Concrete Composites, 2022
- Bond deterioration effects on corroded RC bridge pier in seismic zoneStructural Concrete, 2021
- The role of bond strength in structural behaviors of UHPC-NC composite beams: Experimental investigation and finite element modelingComposite Structures, 2021
- A quantitative study on physical and chemical effects of limestone powder on properties of cement pastesConstruction and Building Materials, 2019
- Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)Cement and Concrete Research, 2014
- Lowering the global warming impact of bridge rehabilitations by using Ultra High Performance Fibre Reinforced ConcretesCement and Concrete Composites, 2013
- Development of the mechanical properties of an Ultra-High Performance Fiber Reinforced Concrete (UHPFRC)Cement and Concrete Research, 2006