Mode-Selective Integrated Optical Waveguide for OTTD Systems: Intrinsic Mode Analysis and Wavelength-Dependent Transmission Optimization

Authors:
Open Access
Publisher website
Google Scholar
Abstract
Traditional electronic phased array radars are constrained by electronic bottlenecks, resulting in inherent limitations including large form factor, fixed operational parameters, and narrow instantaneous bandwidth, which fail to meet the stringent requirements of next-generation high-performance radar systems. Optical true time delay (OTTD) technology based on integrated optical waveguides emerges as a core solution for realizing broadband, compact optically controlled beamforming systems. Traditional silicon-based waveguides suffer from severe mode competition (delay jitter > ±0.05 ps), energy leakage (transmission loss > 0.5 dB/cm) and large beamforming angle fluctuation (>0.3°) in OTTD systems, failing to meet the picosecond-level delay accuracy and broadband beam squint-free requirements of next-generation phased array radars. Thus, a customized mode-selective waveguide design for OTTD systems is urgently required. To address these critical challenges, this study proposes an OTTD-customized mode-selective integrated optical waveguide design tailored for OTTD systems, with three distinct innovations: (1) A systematic OTTD-oriented mode classification and selection methodology is established—instead of a conventional single-mode design, the fundamental TE0 mode is identified as the optimal operating mode through Finite-Difference Time-Domain (FDTD) simulation, (95% TE polarization fraction and 2.0553 effective refractive index at 1548.39 nm, which cannot be achieved by other guided modes for OTTD applications). (2) The wavelength-dependent transmission characteristics of the TE0 mode are quantitatively characterized, revealing a linear correlation between the effective refractive index (2.05–2.10) and wavelength (1500–1550 nm), alongside a controllable group delay range of 1.4315–1.4395 ps—this precise linear model fills the gap of lacking OTTD-specialized delay calibration theory in conventional waveguide research. (3) An OTTD-optimized practical mode selection criterion for OTTD applications is proposed by modifying the standard guided-vs-leaky condition for asymmetric waveguides: the effective refractive index of the operating mode must exceed the substrate refractive index with a fabrication tolerance margin (neff > 1.44 ± 0.02 for SiO2 substrate) to mitigate leakage and adapt to OTTD picosecond-level delay precision. This criterion is validated through system-level beamforming experiments (rather than only device-level simulation), and the designed waveguide achieves a mode suppression ratio (MSR) of >30 dB for leakage modes and a transmission loss of <0.2 dB/cm, which is significantly superior to conventional single-mode waveguides in OTTD systems. Experimental results indicate that the angle fluctuation of the beamforming system is less than 0.08°, which is significantly superior to the 0.3° fluctuation observed in traditional silicon waveguide OTTD systems. This work provides a technical solution for improving the performance of optical phased array radar and laser radar and has broad engineering application prospects in microwave photonics and optical communication fields.
Funding Information
  • PLA Army Engineering University (KYSZJKQTZQ23013)

This publication has 11 references indexed in Scilit: