Phase Analysis and Microstructural Investigations of Ce 2 Zr 2 O 7 for High-Temperature Coatings on Ni-Base Superalloy Substrates
Open Access
- 1 January 2019
- journal article
- research article
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 38 (2019) , 773-782
Abstract
Crystalline cerium-zirconate (CZ) powders were synthesized via solution-assisted combustion synthesis route and calcined at 850°C for 8 h to obtain coarse crystalline powders. SEM (scanning electron microscopy) characterization studies were done to evaluate the morphology of the powders. XRD analysis of the resulting powder confirmed the presence of crystalline α-Ce 2 Zr 2 O 7 along with a Ce 2 Zr 2 O 8 phase having a disordered fluorite cubic lattice. Phase composition, lattice parameters, and the atomic positions were also investigated. Refinement of XRD data was done to quantify the amount of α-Ce 2 Zr 2 O 7 and Ce 2 Zr 2 O 8 phases. Ni-base superalloy Inconel 625 was chosen as the coating substrate, and the powders were coated using an air plasma spraying (APS). A thermally grown oxide (TGO)/Al 2 O 3 layer was observed owing to the high temperature of the substrate as well as the diffusion of bond coat material into the substrate. Coated samples were characterized by SEM to study the surface morphology, coating thickness, and interface microstructures. The thickness of the coated sample was found to be 400 μm. Thermal cycling test of the coated sample was carried out at 750°C for 50 h to evaluate the thermal shock resistance of the coating as well as the spalling behavior of the coating. Preliminary oxidation tests were carried out for 50 h at 750°C to evaluate the oxide growth by measuring weight gain of the oxide layers formed. Oxide growth signifies the gradual increment of layers over a period with a parabolic rate constant of about K p = 1.18 × 10 –3 mg 2 cm –4 h –1 .Keywords
This publication has 17 references indexed in Scilit:
- Design and optimization of coating structure for the thermal barrier coatings fabricated by atmospheric plasma spraying via finite element methodJournal of Asian Ceramic Societies, 2014
- Microstructure Evolution and Thermal Durability with Coating Thickness in APS Thermal Barrier CoatingsMaterials Today: Proceedings, 2014
- Microstructural Non-uniformity and Mechanical Property of Air Plasma-sprayed Dense Lanthanum Zirconate Thermal Barrier CoatingMaterials Today: Proceedings, 2014
- Effect of Air Plasma Sprays Parameters on Coating Performance in Zirconia-Based Thermal Barrier CoatingsInternational Journal of Electrochemical Science, 2012
- Overview on advanced thermal barrier coatingsSurface and Coatings Technology, 2010
- Microstructure design and mechanical properties of thermal barrier coatings with layered top and bond coatsSurface and Coatings Technology, 2010
- The influence of oxides on the performance of advanced gas turbinesJournal of the European Ceramic Society, 2008
- Preparation and thermophysical properties of CeO2 doped La2Zr2O7 ceramic for thermal barrier coatingsJournal of Alloys and Compounds, 2007
- Bond coat surface rumpling in thermal barrier coatingsActa Materialia, 2003
- Microstructure, composition and property relationships of plasma-sprayed thermal barrier coatingsSurface and Coatings Technology, 1992