Removal of sulfur dioxide by carbon impregnated with triethylenediamine, using indigenously developed pilot scale setup
- 8 January 2022
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (20) , 30311-30323
Abstract
In order to provide protection against extremely toxic gases, activated carbon (AC) adsorption has long been regarded to be a useful technology in terms of gas removal. AC without chemical impregnation has been considerably less effective than impregnated ACs. AC in present use was modified with an organic amine, i.e., triethylenediamine (TEDA) to enhance the physical and chemical properties of AC in order to remove specific poisonous gases. With the rising concern on environmental pollution, there has been an increased curiosity in ACs as the means for eliminating pollutants from environment. Purpose of this study was to assess the TEDA impregnated AC in terms of adsorption capability for simulant gas like SO2. Analysis was done in a properly designed setup. By using the scheme reported here, significant adsorption of toxic gas was obtained. Maximum removal capability observed by AC-4 for SO2 gas was 374 mg/g-C and its breakthrough time was 264 min. Breakthrough time and adsorption capacity of AC-4 was found to be 25 times and 10 times greater as compared to raw AC. Different characterization techniques were also used to study impregnated AC. It was found that chemical adsorption was the crucial means by which TEDA-impregnated AC removed the simulant gas. Langmuir model was best to represent equilibrium, and adsorption kinetics follow second-order model. The process was endothermic, favorable, and spontaneous.Keywords
All Related Versions
This publication has 32 references indexed in Scilit:
- Reactive adsorption of SO2 on activated carbons with deposited iron nanoparticlesJournal of Hazardous Materials, 2013
- Copper-Modified Activated Carbons as Adsorbents of NO under Ambient ConditionsAdsorption Science & Technology, 2011
- Removal efficiency of radioactive methyl iodide on TEDA-impregnated activated carbonsFuel Processing Technology, 2011
- A Simple Method for Calculating the Overall Adsorption Rate Constant in the Wheeler–Jonas EquationAdsorption Science & Technology, 2011
- Role of TEDA as an Activated Carbon Impregnant for the Removal of Cyanogen Chloride from Air Streams: Synergistic Effect with Cu(II)The Journal of Physical Chemistry C, 2010
- Adsorption isotherm models and properties of SO2 and NO removal by palm shell activated carbon supported with cerium (Ce/PSAC)Chemical Engineering Journal, 2010
- Production and characterization of granular activated carbon from activated sludgeBrazilian Journal of Chemical Engineering, 2009
- Breakthrough behavior of sulphur mustard vapor on whetlerite carbonJournal of Hazardous Materials, 2006
- The Wheeler–Jonas equation: a versatile tool for the prediction of carbon bed breakthrough timesCarbon, 2004
- Thermodynamics of adsorption in porous materialsAIChE Journal, 2002