The influence of rock mass fracturing on splitting and contour blasts
- 18 March 2021
- journal article
- research article
- Published by Taylor & Francis in Geomechanics and Geoengineering
- Vol. 17 (3) , 822-833
Abstract
Splitting and contour blasting are aimed to achieve suitable profiles by cutting along a surface, while common blasting is intended to detach and to fragment relevant rock volumes by increasing the fracturing state. These techniques are adopted in both underground works (tunnels, caverns, quarries) and also for surface excavations (quarries, mines, rock slopes engineering). Contour blasts are widely used techniques in mining and civil engineering to enhance performance while maintaining the safety of personnel and infrastructure. Splitting blasts are mainly used in dimension stone mining to obtain intact blocks of valuable ornamental stone. The parameters of controlled blasting (geometry, charge, blast agent) require an accurate selection using optimised blasting patterns and explosive properties; most of the proposed methods are limited and unsatisfactory due to insufficient consideration of rock mass properties. A quick but effective comparison and analysis of the different characteristics of the rock mass and its heterogeneities is presented, as it indicates a better strategy to determine a tailored blasting design for a given site, thus significantly improving the contour blasting quality.Keywords
This publication has 22 references indexed in Scilit:
- Measurements of and correlations between block size and rock quality designation (RQD)Tunnelling and Underground Space Technology, 2005
- Indirect determination of the modulus of deformation of rock masses based on the GSI systemInternational Journal of Rock Mechanics and Mining Sciences, 2004
- An application of fuzzy sets to the Geological Strength Index (GSI) system used in rock engineeringEngineering Applications of Artificial Intelligence, 2003
- Some new Q-value correlations to assist in site characterisation and tunnel designInternational Journal of Rock Mechanics and Mining Sciences, 2002
- Influence of air-deck blasting on fragmentation in jointed rocks in an open-pit manganese mineEngineering Geology, 2000
- On the influence of rock mass quality on the quality of blasting work in tunnel drivingTunnelling and Underground Space Technology, 1998
- International society for rock mechanics commission on standardization of laboratory and field testsInternational Journal of Rock Mechanics and Mining Sciences, 1978
- Determining rock mass deformability: experience from case historiesInternational Journal of Rock Mechanics and Mining Sciences, 1978
- Discontinuity spacings in rockInternational Journal of Rock Mechanics and Mining Sciences, 1976
- Engineering classification of rock masses for the design of tunnel supportRock Mechanics and Rock Engineering, 1974