Experimental and 1D Numerical Investigations on the Exhaust Emissions of a Small Spark Ignition Engine Considering the Cylinder-by-Cylinder Variability
- 14 April 2020
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper reports a numerical and experimental analysis on a twin-cylinder turbocharged Spark Ignition engine carried out to investigate the cylinder-to-cylinder variability in terms of performance, combustion evolution and exhaust emissions.The engine was tested at 3000 rpm in 20 different steady-state operating conditions, selected with the purpose of observing the influence of cylinder-by-cylinder A/F ratio variations and the EGR effects on the combustion process and exhaust emissions for low to medium/high loads. The experimental outcomes showed relevant differences in the combustion evolution (characteristic combustion angles) between cylinders and not negligible variations in the emissions of the single cylinder exhaust and the overall engine one. This misalignment resulted to be due to differences in the injected fuel amount by the port injectors in the two cylinders, mainly deriving from the specific fuel rail geometry.The experimental data were then used to validate a 1D engine model, integrated with refined sub-models of turbulence, combustion, heat transfer and emissions. The model takes into account the in-cylinder production of noxious species, and their propagation in the exhaust system, up to the three-way catalytic converter. A satisfactory accuracy was reached in reproducing the overall engine performance and the combustion process in the two cylinders. In particular, the emission sub-models confirmed that the variations of the cylinder-out exhaust emissions (NOx, HC and CO) were mainly due to the non-uniform effective in-cylinder A/F ratio.The proposed numerical methodology has the potential to highlight unexpected combustion non-uniformities among different cylinders and represents a powerful support to the engine design and development. It also allows for the prediction of the overall exhaust emissions at different engine operating conditions up to the entire domain, thus assisting the engine calibration phase and reducing the experimental efforts.Keywords
This publication has 30 references indexed in Scilit:
- Techniques for CO 2 Emission Reduction over a WLTC. A Numerical Comparison of Increased Compression Ratio, Cooled EGR and Water InjectionSAE International Journal of Advances and Current Practices in Mobility, 2018
- Combined Effects of Valve Strategies, Compression Ratio, Water Injection, and Cooled EGR on the Fuel Consumption of a Small Turbocharged VVA Spark-Ignition EngineSAE International Journal of Engines, 2018
- Numerical Study of the Potential of a Variable Compression Ratio Concept Applied to a Downsized Turbocharged VVA Spark Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2017
- Extension and Validation of a 1D Model Applied to the Analysis of a Water Injected Turbocharged Spark Ignited Engine at High Loads and over a WLTP Driving CycleSAE International Journal of Engines, 2017
- Knocking combustion in spark-ignition enginesProgress in Energy and Combustion Science, 2017
- Water injection for gasoline engines: Potentials, challenges, and solutionsInternational Journal of Engine Research, 2015
- Experimental Investigation on Early and Late Intake Valve Closures for Knock Mitigation through Miller Cycle in a Downsized Turbocharged EngineSAE International Journal of Advances and Current Practices in Mobility, 2015
- Experimental analysis of a spark-ignition engine using exhaust gas recycle at WOT operationApplied Energy, 2010
- Downsizing of SI Engines by Turbo-Charging2006
- A Newly Developed Intelligent Variable Valve Timing System - Continuously Controlled Cam Phasing as Applied to a New 3 Liter Inline 6 EngineSAE International Journal of Advances and Current Practices in Mobility, 1996