Effect of oxygen gas and annealing treatment for magnetically enhanced reactive ion etched (Ba0.65,Sr0.35)TiO3 thin films
Authors:
- 1 January 2007
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 101 (1) , 014107
Abstract
Sol-gel-derived (BST) thin films were etched in and plasmas using magnetically enhanced reactive ion etching technology. Experimental results show that adding appropriate to can better the etching effects of BST films for the increase of etching rate and decrease of etched residues. The maximum etching rate is when gas-mixing ratio is equal to . X-ray photoelectron spectroscopy (XPS) data confirm accumulation of reaction products on the etched surface due to low volatility of reaction products such as Ba and Sr fluorides, and these residues could be removed by annealing treatment. The exact peak positions and chemical shifts of the interested elements were deduced by fitting XPS narrow-scan spectra with symmetrical Gaussian-Lorentzian product function for Ba , Sr , and O peaks, meanwhile asymmetrical Gaussian-Lorentzian sum function was used to fit Ti doublet to adjust the multiple splitting and/or shake-up process of transition-metal Ti cations. Compared to the unetched counterparts, the etched Ba , Ba , Sr , Sr , Ti , Ti , and O peaks shift towards higher binding energy regions by amounts of 1.31, 1.30, 0.60, 0.79, 0.09, 0.46, and , respectively. While the etched Ti and Ti peaks have small chemical shifts for two reasons. One is that Ti fluoride is mostly removed from the etched surface because of its higher volatility in the process of thermal desorption. The other is that there is a shift compensation between and the etched BST matrix in which cations are partially reduced to form cations in the presence of adequate oxygen vacancies. The simulated formula of each BST surface is obtained to be , , and , and then the average valence of Ti cations is estimated to be , , and with respect to the electroneutrality principle, respectively. It is inferred that electrical properties of the etched BST film may be partially recovered by postannealed after etched.
Keywords
This publication has 17 references indexed in Scilit:
- Effects of post-deposition oxygen annealing on tuning properties of Ba0.8Sr0.2TiO3 thin-film capacitors for microwave integrated circuitsMaterials Chemistry and Physics, 2005
- Reactive ion etching of sol–gel-derived BST thin filmCeramics International, 2004
- Plasma etching of (Ba,Sr)TiO3 thin films using inductively coupled Cl2/Ar and BCl3/Cl2/Ar plasmaThin Solid Films, 2004
- Etching characteristic and mechanism of BST thin films using inductively coupled Cl2/Ar plasma with additive CF4 gasThin Solid Films, 2004
- Etching mechanisms of (Ba,Sr)TiO3 thin films in CF4/Ar inductively coupled plasmaMicroelectronic Engineering, 2004
- Dry etching characteristics of (Ba0.6,Sr0.4)TiO3 thin films in high density CF4/Ar plasmaSurface and Coatings Technology, 2003
- Temperature dependence of the Raman spectra of polycrystallinePhysical Review B, 2000
- Validation and accuracy of software for peak synthesis in XPSJournal of Electron Spectroscopy and Related Phenomena, 1998
- Challenges for plasma etch integration of ferroelectric capacitors in FeRAM's and DRAM'sIntegrated Ferroelectrics, 1997
- X-ray photoelectron spectroscopic investigation of carbon incorporation and segregation during pseudomorphic growth of Si1−yCy on Si(001)Journal of Applied Physics, 1996