Enhancement of physical and optical performances of polycarbonate‐based diffusers for direct‐lit LED backlight unit by incorporation of nanoclay platelets
Authors:
- 15 October 2015
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 133 (6)
Abstract
Using twin‐extrusion compounding followed by compression molding processes, polycarbonate/clay nanocomposite optical diffusers with highly intercalated and exfoliated nanostructure could be prepared for application in direct‐lit LED backlight unit. The incorporation of nanoclay platelets with an appropriate level of content substantially improved thermal resistance, as well as thermo‐mechanical, and mechanical flexural properties. The optical property of luminance uniformity with respect to both location and viewing angle was also enhanced by the load of nanoclay platelets along with silicone bead, probably due to efficient scattering and diffusion action of the nanoclay. However, excess loading of nanoclay had insignificant effect on the improvement of properties for the nanocomposite diffusers. In addition, the presence of nanoclay platelets in the PC matrix effectively suppressed the moisture absorption rate, suggesting the feasibility of avoiding the warpage phenomena of the optical diffuser during use. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 42973.Keywords
Funding Information
- Korea Evaluation Institute of Industrial Technology
This publication has 25 references indexed in Scilit:
- Research of diffusing plates for LCD backlightsOptik, 2010
- LED-Lit LCD TVsMolecular Crystals and Liquid Crystals, 2008
- Optimization of Light Guide Plate with Microstructures for Extra Light Modern Backlight ModuleJapanese Journal of Applied Physics, 2008
- Polypropylene Nanocomposites: Effect of Organo-modified Layered Silicates on Mechanical, Thermal & Morphological PerformanceJournal of Thermoplastic Composite Materials, 2008
- Fabrication of a nano-wire grid polarizer for brightness enhancement in liquid crystal displayNanotechnology, 2006
- Analysis of thermo-physical and optical properties of a diffuser using PET/PC/PBT copolymer in LCD backlight unitsDisplays, 2005
- Preparation of an ultraviolet‐curable water‐borne poly(urethane acrylate)/silica dispersion and properties of its hybrid filmJournal of Applied Polymer Science, 2004
- The Advanced Highly Scattering Optical Transmission Polymer Backlight for Liquid Crystal DisplaysJapanese Journal of Applied Physics, 2002
- Viscoelastic and mechanical properties of thermoset PMR-type polyimide–clay nanocompositesPolymer, 2002
- LP‐2: High Performance LCD Backlighting using High Intensity Red, Green and Blue Light Emitting DiodesSID Symposium Digest of Technical Papers, 2001