Formation of corundum-rich alumina coatings on low-carbon steel by plasma electrolytic oxidation
Authors:
- F SimchenFSF Simchen
- N Masoud-NiaNMN Masoud-Nia
- T MehnerTMT Mehner
- T LampkeTLT Lampke
Open Access
- 1 May 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1147 (1)
Abstract
The plasma electrolytic oxidation (PEO) is an innovative method for providing light metals and their alloys with protective ceramic surfaces. However, for iron-based materials, the process requires very high current densities and results in the formation of coatings which consist of less stable iron compounds. Therefore, it was the aim of this study to design a PEO procedure on low-carbon steel at moderate current densities, which allows for the formation of ceramic coatings whose chemical composition is dominated by the electrolyte constituents. The electrolyte used was based on aluminate and preselected by systematic electrochemical passivation experiments. The PEO treatment was monitored by electrical and optical process diagnostics. As a result of this, it was possible to obtain alumina layers of 80 micrometers in thickness, with a high corundum content of approximately 50 to 90%, after 37 minutes of treatment time, at a current density below 25 A/dm2 on C8C-steel. However, the coating’s microstructure was inhomogeneous and showed poor substrate bonding. Based on the results of the experimental work, explanatory approaches were provided and a course of action is suggested for counteracting these problems.Keywords
This publication has 19 references indexed in Scilit:
- Anticorrosive non-crystalline coating prepared by plasma electrolytic oxidation for ship low carbon steel pipesScientific Reports, 2020
- Introduction to Plasma Electrolytic Oxidation—An Overview of the Process and ApplicationsCoatings, 2020
- Characterization of plasma electrolytic oxidation coating on low carbon steel prepared from silicate electrolyte with Al nanoparticlesCeramics International, 2017
- Plasma electrolytic oxidation coating produced on 39NiCrMo3 steelSurface and Coatings Technology, 2016
- Microstructure and photocatalytic activity of porous TiO2–Fe2O3 composite film by PEO coupled with post heat treatmentInternational Journal of Hydrogen Energy, 2016
- Microplasma electrochemical deposition of aluminum oxide-polyethylene composite coatings on iron surfaceProtection of Metals and Physical Chemistry of Surfaces, 2010
- Microstructure, bonding strength and thermal shock resistance of ceramic coatings on steels prepared by plasma electrolytic oxidationApplied Surface Science, 2009
- Plasma electrolytic ceramic-like aluminum oxide coatings on ironJournal of Applied Electrochemistry, 2009
- Anodizing – A Key for Surface Treatment of AluminiumKey Engineering Materials, 2008
- Plasma electrolysis for surface engineeringSurface and Coatings Technology, 1999