Seepage and pore pressures around contiguous pile retaining walls
Authors:
- 1 July 2016
- journal article
- research article
- Published by Emerald Publishing in Géotechnique
- Vol. 66 (7) , 523-532
Abstract
Diaphragm and bored pile retaining walls are often used for the construction of basements, metro station boxes and cut-and-cover tunnels in urban areas. While diaphragm and secant pile walls are generally intended (and assumed in analysis) to be effectively impermeable, contiguous piles may allow through-the-wall seepage even when preventative measures have been undertaken. Provided the flow rates can be tolerated or dealt with, through-the-wall seepage should result in a reduction in pore water pressures behind the retaining wall compared with an impermeable construction, giving the potential for reductions in the depth of embedment and wall thickness, and hence cost. However, this potential is rarely realised owing to the difficulty in quantifying with sufficient confidence the hydraulic regime associated with a leaky retaining wall. This paper reports the results of laboratory investigations and numerical analyses carried out to assess the effect of the inter-pile gaps on the pore pressure distribution around a contiguous pile retaining wall. The results show that the pore pressures behind the piles reduce significantly as the pile spacing is increased. Long-term field monitoring confirms that the pore water pressures are much lower than would be expected for an impermeable retaining wall in similar soil. The applicability of a simple expression linking the pile diameter, pile spacing and the effective permeability of an equivalent uniform wall is demonstrated.Keywords
This publication has 16 references indexed in Scilit:
- Analytical and combined numerical methods evaluating pore water pressure on tunnelsGéotechnique, 2010
- Effect of drainage conditions on porewater pressure distributions and lining stresses in drained tunnelsTunnelling and Underground Space Technology, 2009
- Pore water pressure and horizontal stress changes measured during construction of a contiguous bored pile multi-propped retaining wall in Lower Cretaceous claysGéotechnique, 2007
- Stresses around Pressure Tunnels with Semi-permeable LinersRock Mechanics and Rock Engineering, 2006
- Installation effects of a bored pile wall in overconsolidated clayGéotechnique, 2006
- Ground conditions around an old tunnel in London ClayProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2005
- Briefing: Embedded retaining walls: guidance for economic designProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2003
- A numerical study of the effect of groundwater movement on long-term tunnel behaviourGéotechnique, 2002
- State-of-the-Art Paper: Triaxial Testing Methods for Soils1988
- Design of the retaining walls for the M25 cut and cover tunnel at Bell CommonGéotechnique, 1984