Dislocation Loop Generation Differences between Thin Films and Bulk in EFDA Pure Iron under Self-Ion Irradiation at 20 MeV
Open Access
Abstract
In the present investigation, high-energy self-ion irradiation experiments (20 MeV Fe+4) were performed on two types of pure Fe samples to evaluate the formation of dislocation loops as a function of material volume. The choice of model material, namely EFDA pure Fe, was made to emulate experiments simulated with computational models that study defect evolution. The experimental conditions were an ion fluence of 4.25 and 8.5 × 1015 ions/cm2 and an irradiation temperature of 350 and 450 °C, respectively. First, the ions pass through the samples, which are thin films of less than 100 nm. With this procedure, the formation of the accumulated damage zone, which is the peak where the ions stop, and the injection of interstitials are prevented. As a result, the effect of two free surfaces on defect formation can be studied. In the second type of experiments, the same irradiations were performed on bulk samples to compare the creation of defects in the first 100 nm depth with the microstructure found in the whole thickness of the thin films. Apparent differences were found between the thin foil irradiation and the first 100 nm in bulk specimens in terms of dislocation loops, even with a similar primary knock-on atom (PKA) spectrum. In thin films, the most loops identified in all four experimental conditions were b ±a0{200} type with sizes of hundreds of nm depending on the experimental conditions, similarly to bulk samples where practically no defects were detected. These important results would help validate computational simulations about the evolution of defects in alpha iron thin films irradiated with energetic ions at large doses, which would predict the dislocation nucleation and growth.Keywords
Funding Information
- Ministerio de Ciencia e Innovación (PID2019-105325RB-C31)
- Comunidad de Madrid (TECHNOFUSION III- CM (2018/EMT-4437))
- EUROfusion (633053)
This publication has 81 references indexed in Scilit:
- Dislocation Loop Formation and Growth under In Situ Laser and/or Electron IrradiationScientific Reports, 2011
- Dynamic observations of heavy-ion damage in Fe and Fe–Cr alloysJournal of Nuclear Materials, 2009
- Void nucleation, growth, and coalescence in irradiated metalsJournal of Nuclear Materials, 2008
- Defect production efficiency in metals under neutron irradiationJournal of Nuclear Materials, 2004
- -Loop characterization in α-Fe: comparison between experiments and modelingJournal of Nuclear Materials, 2002
- The effect of free surfaces on cascade damage production in ironJournal of Nuclear Materials, 2002
- Experimental studies of cascade phenomena in metalsJournal of Nuclear Materials, 1993
- An overview of neutron irradiation effects in LMFBR materialsJournal of Nuclear Materials, 1982
- A TEM study of neutron-irradiated ironJournal of Nuclear Materials, 1982
- Effect of self-ion injection in simulation studies of void swellingJournal of Nuclear Materials, 1977