Performance improvement of TiO2∕P3HT solar cells using CuPc as a sensitizer
- 18 February 2008
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 92 (7) , 073307
Abstract
In this work, a new type of TiO2/polymer solar cells was fabricated. The device structure was indium tin oxide titanium dioxide (TiO2)/ copper phthalocyanine (CuPc)/poly(3-hexylthiophene) (P3HT)/Au. In this architecture, TiO2 was designed to act as electron acceptor, and P3HT was electron donor. CuPc was used as a sensitizer to enhance photon absorption. The results show that by inserting CuPc between P3HT and TiO2 layers, the light absorption, excitons separation, and photocurrent under illumination are dramatically improved. The device has a short current density (JSC) of 1.15mA∕cm2 and power conversion efficiency (η) of 0.28% without CuPc layer. However, JSC and η turn to be 2.22mA∕cm2 and 0.66%, respectively, with a 20nm thickness CuPc layer under air mass 1.5 global (AM1.5G) illumination with the intensity of 100mW∕cm2. The performance improvement can be attributed to the higher carrier mobility and the stronger photon absorption using CuPc as a sensitizing layer.Keywords
This publication has 15 references indexed in Scilit:
- Improving efficiency of organic photovoltaic cells with pentacene-doped CuPc layerApplied Physics Letters, 2007
- P3HT/TiO2 bulk-heterojunction solar cell sensitized by a perylene derivativeSolar Energy Materials and Solar Cells, 2007
- Using Resonance Energy Transfer to Improve Exciton Harvesting in Organic–Inorganic Hybrid Photovoltaic CellsAdvanced Materials, 2005
- Hybrid Zinc Oxide Conjugated Polymer Bulk Heterojunction Solar CellsThe Journal of Physical Chemistry B, 2005
- Efficient Hybrid Solar Cells from Zinc Oxide Nanoparticles and a Conjugated PolymerAdvanced Materials, 2004
- Photoinduced Electron Transfer and Photovoltaic Response of a MDMO‐PPV:TiO2 Bulk‐HeterojunctionAdvanced Materials, 2003
- A solid state solar cell using sol–gel processed material and a polymerChemical Physics Letters, 2001
- Solid state dye-sensitized TiO2 solar cells with poly(3-octylthiophene) as hole transport layerSynthetic Metals, 2001
- Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodesJournal of the American Chemical Society, 1993
- A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 filmsNature, 1991