Effects of surface texture size on the tribological properties of slideways
- 11 August 2010
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 224 (9) , 885-890
Abstract
The effects of surface texture on the tribological properties of slideways were investigated experimentally. The authors designed an experimental apparatus for evaluating textured surfaces using specimens of a practical size (82 mm × 82 mm) considering the slideways used for machine tools which are one of the application fields for their research. The evaluated textures were dimple and groove textures, and their diameters and widths varied from 50 μm to 1 mm. The textures were processed by sandblasting as it is one of the alternative methods applied in industry. For comparison with the conventional textures, scraped surfaces were also evaluated. The friction coefficient and the film thickness were measured under the conditions of plane contact, and lubricating with the oil to clarify the effects of the textured pattern. The experimental results showed that the friction coefficient of the textured surfaces was smaller than that of the flat surfaces in the mixed lubrication regime. Regarding the mechanisms of friction reduction by texture types, the authors think that the dimples played the role of oil reservoir, and the parallel grooves prevented side leakage of the lubricating oil.Keywords
This publication has 13 references indexed in Scilit:
- Development of cutting tools with microscale and nanoscale textures to improve frictional behaviorPrecision Engineering, 2009
- Preliminary investigation of the effect of dimple size on friction in line contactsTribology International, 2009
- Increasing nanohardness and reducing friction of nitride steel by laser surface texturingTribology International, 2009
- Tribological effects of surface texturing on nitriding steel for high-performance engine applicationsWear, 2008
- Friction and wear of MoS2 films on laser textured steel surfacesSurface and Coatings Technology, 2008
- The effect of laser surface texturing on frictional performance of face sealJournal of Materials Processing Technology, 2008
- Microlubrication effect by laser-textured steel surfacesWear, 2007
- Optimization of the surface texture for silicon carbide sliding in waterApplied Surface Science, 2006
- Testing piston rings with partial laser surface texturing for friction reductionWear, 2006
- Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contactWear, 2003